× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I think recreating the storage space would probably have been quicker, at
least that what my experience has been (though I do not have any actual
numbers to quantify this).

The only reason I can think of why this might be is that the CRTNWSSTG runs
on the host system and accesses the disk directly whereas the disk
initialization is going through a layer of virtualization.

I also think the CRTNWSSTG has less performance impact on the disks which
is useful if there is any workload running in the hosted LPAR.

On Tue, Nov 6, 2018 at 9:09 AM Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
wrote:

Paul,

I found the issue.
At the point of the restore, DST password is default, which is QSECOFR.
I was keying in the actual DST password.

But, I had to shutdown, no command access to issue the CHGDSTPWD
PASSWORD(*DEFAULT).
Live and learn.
And I had to initialize the load source, AGAIN, for a second time, another
3 1/2 hours.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Musselman, Paul
Sent: Monday, November 05, 2018 2:59 PM
To: Midrange Systems Technical Discussion
Subject: RE: How long should it take to initialize a 600gb NWS load source?

Paul--

You should be able to reset the DST password without a complete shutdown.

As QSECOFR: (You must be QSECOFR, not a QSECOFR-look-alike)
CHGDSTPWD PASSWORD(*DEFAULT)

This should put it back to QSECOFR (or is it qsecofr? I forget)

Paul E Musselman
PaulMmn@xxxxxxxxxxxxx

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of
Steinmetz, Paul
Sent: Saturday, November 03, 2018 11:51 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: How long should it take to initialize a 600gb NWS load source?
...
When trying to enter DST, DST password became disabled.
Had to shutdown to reset DST password.
...
Paul
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.