RE: How long should it take to initialize a 600gb NWS load source?

Install of the Licensed Internal Code Completed.
However, I got a disk configuration message, only contained one unit.
When trying to enter DST, DST password became disabled.
Had to shutdown to reset DST password.
Load Source is being initialized, again.

1) How do I fix the disk configuration issue?
2) Is the DST password different after the install of LIC?

Paul


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Saturday, November 03, 2018 11:04 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: How long should it take to initialize a 600gb NWS load source?

Init Load Source completed.
3 hr 20 mins.
Install of the Licensed Internal Code in progress.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Saturday, November 03, 2018 10:51 PM
To: Midrange Systems Technical Discussion
Subject: Re: How long should it take to initialize a 600gb NWS load source?

It should take just seconds. They are formatted during the CRTNWSSTG so
during the install nearly zero time is required.

IF you are re-using an NWSSTG object that was previously used then it
WILL re-format during the install. On 10K Drives and 600GB (VERY big
IMHO) I would expect this to take SEVERAL hours, 6 to 10 even.

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 11/3/2018 10:43 PM, Steinmetz, Paul wrote:

I'm testing a BRMS recovery, using a client sandbox LPAR, all virtualized, expect for the FC card which I moved..
I'm at
2. Install Licensed Internal Code and Initialize System
Going on 4 hours.
How long should it take to initialize a 600gb NWS load source?
Hosted drives are 10k spinny.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/