Re: How long should it take to initialize a 600gb NWS load source? -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

It should take just seconds. They are formatted during the CRTNWSSTG so during the install nearly zero time is required.

IF you are re-using an NWSSTG object that was previously used then it WILL re-format during the install. On 10K Drives and 600GB (VERY big IMHO) I would expect this to take SEVERAL hours, 6 to 10 even.

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 11/3/2018 10:43 PM, Steinmetz, Paul wrote:

I'm testing a BRMS recovery, using a client sandbox LPAR, all virtualized, expect for the FC card which I moved..
I'm at
2. Install Licensed Internal Code and Initialize System
Going on 4 hours.
How long should it take to initialize a 600gb NWS load source?
Hosted drives are 10k spinny.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.