That message came up because the LIC remembered having more disk units than
the one it currently has. Not a big deal. I always go into DST at that
point and add all the remaining disk units (which will format them, unless
as Larry pointed out you create brand new ones for it) and take "some
minutes" to do. Then the balance of the recovery should go as planned.
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Saturday, November 03, 2018 10:51 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: How long should it take to initialize a 600gb NWS load source?
Install of the Licensed Internal Code Completed.
However, I got a disk configuration message, only contained one unit.
When trying to enter DST, DST password became disabled.
Had to shutdown to reset DST password.
Load Source is being initialized, again.
1) How do I fix the disk configuration issue?
2) Is the DST password different after the install of LIC?
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Saturday, November 03, 2018 11:04 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: How long should it take to initialize a 600gb NWS load source?
Init Load Source completed.
3 hr 20 mins.
Install of the Licensed Internal Code in progress.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
DrFranken
Sent: Saturday, November 03, 2018 10:51 PM
To: Midrange Systems Technical Discussion
Subject: Re: How long should it take to initialize a 600gb NWS load source?
It should take just seconds. They are formatted during the CRTNWSSTG so
during the install nearly zero time is required.
IF you are re-using an NWSSTG object that was previously used then it WILL
re-format during the install. On 10K Drives and 600GB (VERY big
IMHO) I would expect this to take SEVERAL hours, 6 to 10 even.
- Larry "DrFranken" Bolhuis
www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.
On 11/3/2018 10:43 PM, Steinmetz, Paul wrote:
I'm testing a BRMS recovery, using a client sandbox LPAR, all virtualized,
expect for the FC card which I moved..
I'm at
2. Install Licensed Internal Code and Initialize System Going on 4
hours.
How long should it take to initialize a 600gb NWS load source?
Hosted drives are 10k spinny.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
midrange.com
