× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



i don\t know how can i build string but i know cat opcode function and
trimming % trim etc. but how can i make it work to pass the value of
encodedtokenexchange after reading that input xml
file am i doing something wrong by writing this in rpgle should i write it
in cl program using chgvar etc to pass these values in openssl?
also if possible if someone could just slightly modify my program mentioned
in link in my previous email then it would be much helpful to focus me
where exactly correction is needed also as mentioned earlier that usropn is
compilation error.

On Fri, Nov 1, 2019 at 9:39 PM Kevin Bucknum <Kevin@xxxxxxxxxxxxxxxxxxx>
wrote:

Do you know how to build strings in RPG? Add the open statement where it
is supposed to go. Go back and look at the examples you based your code on
if you don't know where that is. Then in debug look at what is in the CMD
variable right before the open runs. Until that statement has what you can
get to run interactively, you aren't going to get this to work.

-----Original Message-----
From: RPG400-L [mailto:rpg400-l-bounces@xxxxxxxxxxxxxxxxxx] On Behalf Of
Rishi Seth
Sent: Friday, November 01, 2019 3:26 PM
To: RPG programming on IBM i <rpg400-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: parsing varying length field from XML file using RPGLE program

i want that variable to have that value because that encoded exchangetoken
value keeps changing inside xml file so can't hardcode it in my program
logic.

On Fri, Nov 1, 2019 at 9:22 PM Rishi Seth <rishiseth99@xxxxxxxxx> wrote:

let it be two different things but that variable does have that long
encoded string in in i can see it\s value inside while debugging this
program and just before the openssl it has that long \u3VtN.......dVA=='
value inside it so what can i do to pass this value in it secondly if
i use thar record instead of string1 and put usropn 5n second line of my
code
after plist then it gives me compilation error:-"*RNF7062 30 1 There
is no OPEN for a file that specifies user-controlled
open; the File specification is ignored.
"

On Fri, Nov 1, 2019 at 9:11 PM Kevin Bucknum
<Kevin@xxxxxxxxxxxxxxxxxxx>
wrote:

I don't think you understand how UNIXCMD works. It runs the command
you give it in pase, and then returns the standard out back to you.
If you want the command to be run to start like this:
echo
'u3VtNgfyWU9faZc3Iaa8ZWbE5UZCfmC17yA4MyW0ghflt9dNQNDpCcgMZiG/kXPE4vv2
CHL
93B4iKiODHxxdVA=='
then you need to pass it that. Your program has this:
echo encodedExchangeToken
Those are not the same two strings.
Also - You don't have USROPN on your UNIX file, so you aren't
actually even passing anything in as a command to be run.
Finally you are reading the result of the command into a variable
called record. The variable string1 isn't ever used in your program,
so it will never have a value.

-----Original Message-----
From: RPG400-L [mailto:rpg400-l-bounces@xxxxxxxxxxxxxxxxxx] On Behalf
Of Rishi Seth
Sent: Friday, November 01, 2019 2:55 PM
To: RPG programming on IBM i <rpg400-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: parsing varying length field from XML file using RPGLE
program

also evenif i just remove .txt extension from string1 then also
nothing gets written in it when i check it\s value in debug mode>/
Evaluate Expression



Previous debug expressions



> EVAL string1

STRING1 =


....5...10...15...20...25...30...35...40...45...50...55...60

1 '
'

61 ' '




















Bottom
Debug . . .



F3=Exit F9=Retrieve F12=Cancel F16=Repeat find F19=Left
F20=Right
F21=Command entry F23=Display output




On Fri, Nov 1, 2019 at 8:46 PM Rishi Seth <rishiseth99@xxxxxxxxx>
wrote:

i already interactively tested this command and it gives this
result:-

echo
'u3VtNgfyWU9faZc3Iaa8ZWbE5UZCfmC17yA4MyW0ghflt9dNQNDpCcgMZiG/kXPE4v
v2C HL 93B4iKiODHxxdVA==' | openssl enc -d -aes-128-ecb -K
363631653237354f494d31554
c594c4a -nopad -nosalt -base64 -A

707fbe32-0dbc-41e0-888f-5bc40de8c20d2P9AMPCTQ4CZ ¢

and yes i am expecting variable encodedExchangeToken to pass this
value
'u3VtNgfyWU9faZc3Iaa8ZWbE5UZCfmC17yA4MyW0ghflt9dNQNDpCcgMZiG/kXPE4v
v2C HL 93B4iKiODHxxdVA==' to openssl command and write the
decrypted value in defined stand alone variable string1 which is
already defined in my program i just put.txt so that it should also
write the same value as a stream file in my directory path
'/home/i0rs01hu/string1.txt' as well also i don't have that ! i do
have | only not sure while pasting that code from editor to that
link how did it get changed.




[https://www.medtronsoftware.com/img/MedtronMinilogo.bmp] Kevin
Bucknum
Senior Programmer Analyst
MEDDATA / MEDTRON
120 Innwood Drive
Covington LA 70433
Local: 985-893-2550
Toll Free: 877-893-2550
https://www.medtronsoftware.com



CONFIDENTIALITY NOTICE

This document and any accompanying this email transmission contain
confidential information, belonging to the sender that is legally
privileged. This information is intended only for the use of the
individual or entity named above. The authorized recipient of this
information is prohibited from disclosing this information to any
other party and is required to destroy the information after its
stated need has been fulfilled. If you are not the intended
recipient, or the employee of agent responsible to deliver it to the
intended recipient, you are hereby notified that any disclosure,
copying, distribution or action taken in reliance on the contents of
these documents is STRICTLY PROHIBITED. If you have received this
email in error, please notify the sender immediately to arrange for
return or destruction of these documents.
--
This is the RPG programming on IBM i (RPG400-L) mailing list To post
a message email: RPG400-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com


--
This is the RPG programming on IBM i (RPG400-L) mailing list To post a
message email: RPG400-L@xxxxxxxxxxxxxxxxxx To subscribe, unsubscribe, or
change list options,
visit: https://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com


[https://www.medtronsoftware.com/img/MedtronMinilogo.bmp] Kevin Bucknum
Senior Programmer Analyst
MEDDATA / MEDTRON
120 Innwood Drive
Covington LA 70433
Local: 985-893-2550
Toll Free: 877-893-2550
https://www.medtronsoftware.com



CONFIDENTIALITY NOTICE

This document and any accompanying this email transmission contain
confidential information, belonging to the sender that is legally
privileged. This information is intended only for the use of the
individual or entity named above. The authorized recipient of this
information is prohibited from disclosing this information to any other
party and is required to destroy the information after its stated need has
been fulfilled. If you are not the intended recipient, or the employee of
agent responsible to deliver it to the intended recipient, you are hereby
notified that any disclosure, copying, distribution or action taken in
reliance on the contents of these documents is STRICTLY PROHIBITED. If you
have received this email in error, please notify the sender immediately to
arrange for return or destruction of these documents.
--
This is the RPG programming on IBM i (RPG400-L) mailing list
To post a message email: RPG400-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.