Re: How to configure a 2nd Enthernet port to a 2nd Eternet Switch for Load balancing/fail over

Your Aggregate Policy needs to match whatever is configured on the switches
it's plugged into.

Last time I did this it was to a stacked pair of switches and my policy was:
AGGPCY(*ETHCHL *DFT)
but we have moved in the direction of using VIOS and SEA to do this stuff
rather than doing on the i so much so it's been a while.

Here's a useful article on configuring aggregate lines that might help:
https://www.ibm.com/developerworks/ibmi/library/i-ethernetlines/index.html



On Fri, Oct 26, 2018 at 10:01 AM Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
wrote:

Created a ETHAGG, two resources, CMN08 and CMN09.

Line will not vary on, goes to failed status.

Any thoughts from the group on how to trouble shoot this.

Line description . . . . . . . . > ETHAGG
Resource name . . . . . . . . . *AGG
Bridge identifier . . . . . . . *NONE
Online at IPL . . . . . . . . . *YES
Vary on wait . . . . . . . . . . *NOWAIT
Aggregate policy:
Standard . . . . . . . . . . . *LNKAGG
Policy type . . . . . . . . . *DFT
Aggregated resource list . . . . CMN08
+ for more values CMN09

Paul

--

Regards
Evan Harris