×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
https://www.ibm.com/support/knowledgecenter/en/ssw_ibm_i_73/rzajy/rzajylinka
gg.htm
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Tuesday, October 16, 2018 10:54 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: How to configure a 2nd Enthernet port to a 2nd Eternet Switch for
Load balancing/fail over
I'm looking for a resource (pdf/link) on how to configure a 2nd Ethernet
port to a 2nd Ethernet Switch for Load balancing/fail over.
The goal is to provide a higher level of redundancy for if either the 5899
PCI port or the Ethernet switch would fail.
The 2nd port would be connected to a 2nd switch.
I need the details for both the Interface and line description, and any
other TCP/IP config changes (default routes, static routes, etc), if needed.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
