RE: 400 to 4690 POS Store Controller

Chris,

Yes the 400 issuing the RUNRMTCMD has the AS-RMTCMD host server listening 
on port 8475.
The crux of the matter is I don't know anything about the Flex OS 
operating system on the 4690's (another company installed those), and how 
to start (or even if there IS) a daemon task to listen for remote 
commands.

...Neil






Chris Bipes <chris.bipes@Cross-check.com>
Sent by: owner-midrange-l@midrange.com
2001/07/18 14:59
Please respond to MIDRANGE-L

 
        To:     "'MIDRANGE-L@midrange.com'" <MIDRANGE-L@midrange.com>
        cc: 
        Subject:        RE: 400 to 4690 POS Store Controller


Actually you need to have this host server running to submit remote 
commands
from one AS400 to another.  It really has nothing to do with Client 
Access.
As the pc world calls it, it is a DAEMON for the 400.  Give it a try and 
see
if it works.  The other is to submit command via the DDM/DRDA server at 
port
443.  There is also the command part of FTP.  Any of these options 
available
to you?  What port does the PC DAEMON listen at?  Do you have that port
listening on your 400?  Spit tin in the wind at this point.


Christopher K. Bipes               mailto:ChrisB@Cross-Check.com
Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                                   http://www.cross-check.com
6119 State Farm Drive              Phone: 707 586-0551 x 1102
Rohnert Park CA  94928             Fax: 707 586-1884



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---