RE: 400 to 4690 POS Store Controller

Actually you need to have this host server running to submit remote commands
from one AS400 to another.  It really has nothing to do with Client Access.
As the pc world calls it, it is a DAEMON for the 400.  Give it a try and see
if it works.  The other is to submit command via the DDM/DRDA server at port
443.  There is also the command part of FTP.  Any of these options available
to you?  What port does the PC DAEMON listen at?  Do you have that port
listening on your 400?  Spit tin in the wind at this point.


Christopher K. Bipes      mailto:ChrisB@Cross-Check.com
Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                  http://www.cross-check.com
6119 State Farm Drive     Phone: 707 586-0551 x 1102
Rohnert Park CA  94928    Fax: 707 586-1884

-----Original Message-----
From: Neil Palmer [mailto:neilp@dpslink.com]
Sent: Wednesday, July 18, 2001 11:08 AM
To: MIDRANGE-L@midrange.com
Subject: RE: 400 to 4690 POS Store Controller


Chris,

Thanks, but this doesn't have anything to do with Client Access.  The 
4690's running Fles OS don't (can't) run Client Access.
I know RUNRMTCMD can run to an RS/600 or other flavors of Unix, and to 
PC's running the remote command daemon, and other 400's running the REXEC 
TCP server, but we need to get these 4690's to run the commands.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---