Re: Twinax Wiring

Typically its positions 4 and 5 but it TOTALLY depends on your baluns (you
have AT&T).  Although it might work just balun to balun you probably will
have to get an active hub at the AS400 side so the signal gets amplified.
It might be easier to buy new baluns if you can't get the info you need
since they are cheap (+-$30).

Jerry

At 02:31 PM 6/27/2000 -0400, you wrote:
>Hi All
>I have a need for a Twinax printer in a building other than the one I and
>the AS400 are currently located. This is probably not more than 300 to 400
>feet distance. Through the use of telephone patch panels I have a few pairs
>of wires running between the buildings.  I also have available to AT&T
>Adapters that receive in a RJ45 plug and output Twinax. Thinking that Twinax
>only uses two wires, does anyone know what positions of the eight on the
>RJ45 these wires would need to be connected? Has anyone done anything
>similar to this and if so has it worked reasonably well, if at all?
>Any information would be greatly appreciated.
>Thanks in Advance
>Scotty
>
>
>Scotty Muir
>Sr. Systems Programmer
>Triangle Auto Spring Co.
>DuBois, PA.


Jerry Draper, Trilobyte Software Systems, since 1976
Specializing in connecting PC's, Windows, MAC's, and LAN's to the AS/400
Representing Synapse, Apple, UDS, Nlynx, Perle, Lucent, etc.
(415) 457-3431; (415) 258-1658fax; jdraper@wco.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---