• Subject: Re: Table saw shake
  • From: "Dan Bale" <dbale@xxxxxxxxxxx>
  • Date: Mon, 26 Jul 1999 16:08:14 -0400


Glad you worked it out!  Uh, just exactly what version & release are you running
here?  I know what you mean about the belts; I change mine on the old 9335's at
least semi-annually.

It's amazing the things you learn on this mailing list, isn't it?

- Dan Bale  :-^)

>>I forgot to mention, in all my excitement this morning, the table
saw vibration went away with a belt change and reinstalling motor
on saw(per installation instructions)... My old belt looked fine,
but apparently developed a "set" from lack of use in all of the recent
heat wave(which keeps me away from saw). I also did minor tune up of
fence and guard/splitter.. I also went out and purchased a new
Freud LU87 24 tooth thin kerf rip blade, which made a WORLD of
in ripping that nasty old pressure treated 2x10's etc,etc.... I
thought all the hoopla about thin kerfs was just that , HOOPLA, but
no indeed, they do make a huge difference...

I also ordered a set of machined pullys and a link belt, which ought to
help out quite a bit <>>><>><><><>

| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com

This thread ...

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].