× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Apply PTF SF92299 to program product 5769sw1.

-----Original Message-----
From:   owner-midrange-l@midrange.com [mailto:owner-midrange-l@midrange.com]
On Behalf Of Robertson, Scott
Sent:   Monday, July 26, 1999 5:40 PM
To:     'MIDRANGE-L@midrange.com'
Subject:        RE: Table saw shake

I think I would have checked the to see if the system value QTABSAWVIB was
set to 0 before I replaced anything!

Scott S. Robertson
Information Systems Manager
Data Processing Sciences Corp.
 <mailto:Srobertson@dpsciences.com> Srobertson@dpsciences.com
 <http://www.dpsciences.com> http://www.dpsciences.com



                -----Original Message-----
                From:   Pat Barber
[mailto:MBOCEANSIDE@postoffice.worldnet.att.net]
                Sent:   Monday, July 26, 1999 4:49 PM
                To:     MIDRANGE-L@midrange.com
                Subject:        Table saw shake

                I forgot to mention, in all my excitement this morning, the
table
                saw vibration went away with a belt change and reinstalling
motor
                on saw(per installation instructions)... My old belt looked
fine,
                but apparently developed a "set" from lack of use in all of
the recent
                heat wave(which keeps me away from saw). I also did minor
tune up of
                fence and guard/splitter.. I also went out and purchased a
new
                Freud LU87 24 tooth thin kerf rip blade, which made a WORLD
of
                difference
                in ripping that nasty old pressure treated 2x10's
etc,etc.... I
                thought all the hoopla about thin kerfs was just that ,
HOOPLA, but
                no indeed, they do make a huge difference...

                I also ordered a set of machined pullys and a link belt,
which ought to
                help out quite a bit <>>><>><><><>
                +---
                | This is the Midrange System Mailing List!
                | To submit a new message, send your mail to
MIDRANGE-L@midrange.com.
                | To subscribe to this list send email to
MIDRANGE-L-SUB@midrange.com.
                | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
                | Questions should be directed to the list owner/operator:
david@midrange.com
                +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.