× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Current SDMC is not supported on E4C hardware because of a code issue. Last
I heard, the projected support date is June ( ish ) when the SDMC and
Server Firmware will get in sync.

On Fri, Apr 6, 2012 at 9:07 AM,
<William.Epperson@xxxxxxxxxxxxxxxxxxxxxxxx>wrote:

You may look at just running an SDMC console and setting that up. I have
heard that there are some things that the SDMC still will not do that a
physical HMC will do. I know that IBM is trying to get off of the HMC and
they're pushing either the SDMC or Systems Director. I also know you can
run an SDMC as a virtual server but it must include a "second" ethernet
device for connecting into the HMC side of the Power7 systems in order to
manage them. I'm researching this for our installations to see if it makes
sense to drop a virtual machine on my Linux virtual cluster rather than
trying to run it in our VMware environment. It'll just be a matter of
piping another vlan into my linux cluster. If you want to make it simple,
just run a small Linux workstation and install it with two ethernet
devices. It doesn't need much resources to run, but there must be a DHCP
server on that private network to generate the IP's for the Power7 systems.


https://www.ibm.com/developerworks/mydeveloperworks/blogs/aixpert/entry/systems_director_management_console_sdmc_redbook_get_yours_now2?lang=en

Thank you,

William G. Epperson Jr.
Systems Communications Analyst II

2420 East Pikes Peak
Colorado Springs, CO 80909

Office: 719-365-8831




Mission: To provide the highest quality health care
Vision: To create an outstanding health system where patients heal and
people thrive
Values: Compassion - Integrity - Quality - Respect - Teamwork

www.memorialhealthsystem.com

The information contained in or attached to this electronic message is
privileged and confidential, intended only for the use of the individual
(s) named above. If the reader of this message is not the intended
recipient, or the employee or agent responsible to deliver it to the
intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please inform the
sender immediately and remove any record of this message.






From: rob@xxxxxxxxx
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 04/06/2012 05:23 AM
Subject: Re: Configuring Brand New ISeries ASMI / HMC
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Kirk,

How do I reconcile what you've said:
No More HEA's on the E4C models.
With what James said:
We have: HMC1, HMC2, S1, S2, T1-T4.
Isn't T1-T4 indicative of HEA? Or is there some sort of other 4 port
ethernet card?

And, as another poster said, I was a little confused also as to whether he
wanted HMC or Lan Console.
- We can access ASMI, but can't seem to run an HMC device.
- ...but still can't seem to get the Operations Console going...
So my first answer leaned towards Lan Console.

But let me duck back to HMC. I wonder what sort of HMC. Our HMC's are
too old for Power 7 equipment.
Let's see, 720
http://www.ibm.com/developerworks/wikis/download/attachments/53871900/HMC
+and+Firmware+AIX+VUG_Feb+2011.pdf?version=1<http://www.ibm.com/developerworks/wikis/download/attachments/53871900/HMC%0A+and+Firmware+AIX+VUG_Feb+2011.pdf?version=1>
POWER7 requires HMC firmware level V7.710 or later
and

http://www-933.ibm.com/support/fixcentral/firmware/readme?fixid=MH01273#enhance7740

If an HMC is used to manage any POWER7 processor based server, the HMC
must be a model CR3 or later model rack-mount HMC or C05 or later deskside
HMC.
We have CR2's.


Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Kirk Goins <kirkgoins@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 04/05/2012 04:53 PM
Subject: Re: Configuring Brand New ISeries ASMI / HMC
Sent by: midrange-l-bounces@xxxxxxxxxxxx



No More HEA's on the E4C models. They are using a 5767 Dual Port GB NIC
instead. It can NOT be split or Virtualized across partitions. So if you
want real External Ports for each partition, you will need cards for each
partirtionThe Top Port will be where the system looks for the LAN CONSOLE.
The card I believe by default will be in Slot C6.

On Thu, Apr 5, 2012 at 12:57 PM, <rob@xxxxxxxxx> wrote:

There are better minds than me on this list when it comes to that. But
I'll give it a shot. HEA is Host Ethernet Adapter. T1-T4 are those.
And
since it's brand new and I suspect cost more than a can of pop out of
the
soda machine I'd call IBM on a whim if you're still stuck. Most
customers
don't belittle you for calling IBM and grabbing that life line. They'd
rather belittle you for taking days to get done the 'simple' stuff.


Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: James LeLeux <james.leleux@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 04/05/2012 03:51 PM
Subject: Configuring Brand New ISeries ASMI / HMC
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Hello,

Just got a 720 Power ISeries in yesterday and am having a heck of a time
getting it configured for Operations Console. The box I was using last
couple of weeks is a few years old, so it was a bit different and went
ever
so smoothly.

We can access ASMI, but can't seem to run an HMC device. Have a Neoware
appliance that I've used for my other box, but can seem to get it to see
the new box.
We have the HMC IP's.

I think there is a basic step we are missing. Reading manuals and such,
but
still can't seem to get the Operations Console going.

The manual states to use the 'first port' HEA or C1, but no such label
exists on the box.
We have: HMC1, HMC2, S1, S2, T1-T4.

Not sure I even formulated an intellgent question, but if anyone can
point
me in the right direction I'd appreciate it.

Thanks!!
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.