My quick comments, not necessarily about MMAIL, but in sending email through the 400:
Brad Stone's MailTool hasn't ever given us a problem - very inexpensive, just works.
Enuf
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of James H. H. Lampert via MIDRANGE-L
Sent: Tuesday, October 18, 2022 11:55 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Cc: James H. H. Lampert <jamesl@xxxxxxxxxxxxxxxxx>
Subject: Re: Email sending problem -- any Google Relay experts here?
Ladies and Gentlemen: I'm using MMAIL for testing *precisely* because it's a convenience wrapper around QtmmSendMail (which the actual back-end application calls directly). This morning, I was holding out hope that the problem was that the
ZjQcmQRYFpfptBannerStart
This Message Is From an External Sender
This message came from outside your organization.
ZjQcmQRYFpfptBannerEnd
Ladies and Gentlemen:
I'm using MMAIL for testing *precisely* because it's a convenience
wrapper around QtmmSendMail (which the actual back-end application calls
directly).
This morning, I was holding out hope that the problem was that the
Google Relay hadn't yet "ripened." Still no joy.
Here is what my CHGSMTPA currently looks like:
Autostart server . . . . . . . . AUTOSTART *NO
Clear e-mail on start-up . . . . COLDSTART *NO
E-mail directory type . . . . . DIRTYPE *SMTP
Retries by minute: RTYMIN
Number of retries . . . . . . 3
Time interval . . . . . . . . 30
Retries by day: RTYDAY
Number of retries . . . . . . 0
Time interval . . . . . . . . 0
Retries by hour: RTYHOUR
Number of retries . . . . . . 0
Time interval . . . . . . . . 0
Retry remote name server . . . . RTYRMTSVR *NO
Coded character set identifier CCSID 819
Journal . . . . . . . . . . . . JOURNAL *NO
Percent routing character . . . PCTRTGCHR *NO
Support ETRN for server . . . . ETRNSVR *NO
Support 8-bit MIME . . . . . . . MIME8BIT *NO
Delivery status notification: NFYDLVRY
Responsible person . . . . . . *NONE
Subsystem description . . . . . SBSD QSYSWRK
Library . . . . . . . . . . . QSYS
Realtime Blackhole List . . . . RBLSVR *NONE
Allow relayed mail . . . . . . . ALWRLY *NONE
+ for more values
POP send mail window . . . . . . POPWDW *NONE
Interface/domain association . . IFCDMN *NONE
Filter mail for virus . . . . . FTRACN *NONE
Override reject connect list . . OVRRJTCNNL *NO
Allow bare line feed . . . . . . ALWBARELF *YES
Verify identification . . . . . VFYID *NO
Allow authentication . . . . . . ALWAUTH *NONE
Verify MSF messages . . . . . . VFYMSFMSG *YES
Verify from user . . . . . . . . VFYFROMUSR *ALL
Forwarding mailhub server . . . FWDHUBSVR 'smtp-relay.gmail.com'
Automatic registration . . . . . AUTOADD *NO
User ID prefix . . . . . . . . USRIDPFX QSM
Address . . . . . . . . . . . ADDRESS QSMRMTAD
System name . . . . . . . . . SYSNAME TCPIP
Alias table type . . . . . . . TBLTYPE *SYSTEM
User ID delimiter . . . . . . . USRIDDELIM '?'
Mail router . . . . . . . . . . MAILROUTER *SAME
Outgoing EBCDIC/ASCII table: TBLSMTPOUT
Outgoing EBCDIC/ASCII table . *CCSID
Library . . . . . . . . . .
Incoming ASCII/EBCDIC table: TBLSMTPIN
Incoming ASCII/EBCDIC table . *CCSID
Library . . . . . . . . . .
Firewall . . . . . . . . . . . . FIREWALL *NO
Process all mail through MSF . . ALLMAILMSF *NO
Dial-up scheduler: DIALSCD
Start with SMTP server . . . . *NO
Configuration profile . . . .
Connection time interval . . .
Support ETRN for client: ETRNCLT
Enable client ETRN . . . . . . *NO
Incoming mail server address
Mail domain name . . . . . . .
Allow e-mail over implicit SSL ALWIMPSSL *NO
Max incoming e-mail messages . . MAXINEMM *DFT
Max outgoing e-mail messages . . MAXOUTEMM *DFT
Keep until: KEEPUNTIL
Successful final state . . . . *DFT
Unsuccessful final state . . . *DFT
Maximum e-mail message size . . MAXEMMSIZE *DFT
SMTP domain alias . . . . . . . ALIASDMN *NONE
The Google Relay was created to accept anything from the public IP
address of the box, with TLS active. Following instructions, I set a
QIBM_SMTP_SERVER_PORT environment variable at the system level; in
WRKENVVAR, it looks like:
QIBM_SMTP_SERVER_PORT '587'
Am I missing anything?
--
JHHL
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx<mailto:MIDRANGE-L@xxxxxxxxxxxxxxxxxx>
To subscribe, unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx<mailto:MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx>
Before posting, please take a moment to review the archives
at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxxxxxxxxxx<mailto:support@xxxxxxxxxxxxxxxxxxxx> for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
midrange.com
