I was seeing the RMC issue on my 8286-41A running FW860.60 (180)
On this HMC
Version 9
Release 1
Service Pack 921
Build Level 1811111524
Base Version V9R1
Model Type 7042-CR8
Serial Number <redacted>
BIOS D7E136AUS-1.60
HMC driver n/a
MH01734 - Required fix for HMC V9R1 M910 (Base) [x86_64]
MH01759 - HMC V9R1 M920 [x86_64]
MH01762 - HMC V9R1 Service Pack 1 Release (M911) [x86_64]
MH01776 - Required fix for HMC V9R1 M911 [x86_64]
MH01789 - HMC V9R1 Service Pack 1 Release (M921) [x86_64]
MH01800 - iFix for HMC V9R1 M921
But seems to be ok at this time.
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Kevin Monceaux
Sent: Monday, April 22, 2019 9:33 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Active but Unusable RMC Connections
Jim,
On Mon, Apr 22, 2019 at 07:32:42AM -0500, Jim Oberholtzer wrote:
First off, What level of HMC? Fix pack, SP?
The HMC is a 7042-CR8 running:
version= Version: 8
Release: 8.6.0
Service Pack: 3
HMC Build level 20180614.3
MH01773: Fix for HMC V8R8.6.0 SP3 (06-14-2018)
base_version=V8R8.6.0
What level of FSP code?
Is that the firmware level? It's an 8286-41A running SV810_159.
Lastly, no AS/400 in history has ever had an HMC attached to it.
True. But until IBM comes up with a new name that's better than AS/400, most of the folks where I work are going to continue using the old name.
POWER 5, 6, 7, 8 and 9 have HMCs. So in your case which is it?
It's a POWER 8, 8286-41A.
midrange.com
