Re: dont know ip address for lan console or ethernet line

Tim,
I haven't fooled with this for years but I do know
that word 12 is useless info. The document below
will at least give you some idea of what words mean
when dumping them. You have to use 65 + 21
slowly. Don't rush it when you change. I
believe there are typically 4 ports on the PCI card
(if installed) and usually the top one is the most common
one used. Find an online physical layout for the back
of your 520 if you aren't sure.

http://www-01.ibm.com/support/docview.wss?uid=nas8N1018681#AA






From: tim <iseriesstuff@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 03/23/2017 10:13 PM
Subject: Re: dont know ip address for lan console or ethernet line
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



i've done that several times. still getting a6005008 with error codes
below. I have no idea what they mean. Also, during the process it asks
for the console adapter location. Either HEA adapter or external PCI
card. Im guessing its the HEA adapter, but im not sure. If it is the
external PCI card, i dont know what location code to use.


12

04b08061e2c00001
0000000009999999

13
50010a0300000000
0000000000000000

On 3/23/2017 3:55 PM, Arco Simonse wrote:

I have never managed a 9405-520 but this sounds like you are now in the
ASMI console. That is just a graphic frontend for the FSP. You will not

be

able to reset the lan console assignment there.
In the past we have had a 8203-E4A and we had to reset it via the

hardware

console panel with 65+21 functions.

https://www.ibm.com/support/knowledgecenter/pt-br/ssw_i5_54/rzajr/rzajrfunctions6521.htm

It might be helpful for you to understand how the LAN console ip

assignment

mechanism works:

https://www.ibm.com/support/knowledgecenter/POWER5/iphbx_p5/minnetwork.htm

Regards,
-Arco

Op donderdag 23 maart 2017 heeft tim <iseriesstuff@xxxxxxxxx> het

volgende

geschreven:

Ive been able to get into Advanced System Management web interface. I

have

never user this before. Is this a place where i can reset or setup my
ethernet information for lan console?

I see there is a "reset" option. not sure if that would help or not.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD