×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
My two 7310-CR2 HMC's are running V7R7.1.0 and supporting three power 6's.
The 9117 is running 01EM350_085. The 8203 and the 9408 are running
01EL350_085. I am guessing "EH" qualifies as "monster machine". I see
the HMC code level for that firmware at
https://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/ehtablep6.html
Everything I am reading at the link below says your CR3 should be beefy
enough for the job:
http://www-933.ibm.com/support/fixcentral/firmware/readme?fixid=MH01233
What firmware are you coming from? Not sure on "disruptive".
What hmc level are you?
Wait, I reread your email. (Sometimes you confuse me.) You want to
upgrade both your HMC and your firmware to be totally current versus just
applying your server firmware and being partially current. Is that what
you are saying? And, I'm going out on a limb here, you are at 7.7.1 of
hmc code. And, you are at a level of firmware you haven't shared with us
yet. Use the first link to determine if your current level of firmware is
supported by the 7.7.2 of hmc. If so, then upgrade your hmc to 7.7.2
(with appropriate fixes) then upgrade your firmware to the latest version.
http://www-933.ibm.com/support/fixcentral/firmware/readme?fixid=01EH350_103_038
See "Minimum HMC Code Level".
Rob Berendt
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
