RE: SAVRSTLIB - how to set up the network over Ethernet

Development system:

Local location name (from DSPNETA): TO352
Local control point (from DSPNETA): TO352
APPC Controller name: TO35
Remote control point name (from controller description): TO35
APPC Device name: TO35
Remote location name (from device description): TO35
Local location name (from device description): TO352
Mode (from device description): *NETATR
Remote location name (given when executing command): TO35

Production system:

Local location name (from DSPNETA): TO35
Local control point (from DSPNETA): TO35
APPC Controller name: TO352
Remote control point name (from controller description): TO352
APPC Device name: TO352
Remote location name (from device description): TO352
Local location name (from device description): TO35
Mode (from device description): *NETATR
Remote location name (given when executing command): TO352



Thanks,
Bob Dobrowolski
Programmer/Analyst
Star Stainless Screw Co.
(973) 256-2300  x224
r.dobrowolski@xxxxxxxxxxxxxxxxx
USS Cole - Never Forgotten 12 OCT 2000


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Andy
Nolen-Parkhouse
Sent: Wednesday, February 04, 2004 09:30
To: 'Midrange Systems Technical Discussion'
Subject: RE: SAVRSTLIB - how to set up the network over Ethernet


Robert,

>From looking over your error description, it seems that there is a basic
configuration error or an error in the location name given when you execute
the command.

You have the controller and device names which should be unique to each
system.  You have the mode which should be the same on each system.  Then
you have the local/remote location name, which is referenced in both your
communications configuration and as a parameter on your SAVRSTLIB command.

Can you list these things out for each system?

Local location name (from DSPNETA)
Local control point (from DSPNETA)
APPC Controller name
Remote control point name (from controller description)
APPC Device name
Remote location name (from device description)
Local location name (from device description)
Mode (from device description)
Remote location name (given when executing command)

Also verify that your mode description is the same for both systems.

If you go through this exercise, something may jump out at you.  Something
somewhere isn't matching.

Regards,
Andy Nolen-Parkhouse


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.