Re: AS400 Newbie Help -- MIDRANGE-L

--
[ Picked text/plain from multipart/alternative ]
If you go to
<http://publib.boulder.ibm.com/pubs/html/as400/online/v4r4eng.htm>, and
take 'Category bookshelves for V4R4', then '2 Planning and Installation',
you'll find Setting Up 940x Model 150: SA41-5144 and Setting Up 940x Model
170: SA41-5145, which both have instructions on installing this stuff.

There is also a PDF document on installing ethernet cards in 170s and 250s.
Found it at
<http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/v5r1hwpdf/index.htm>,
something called the iSeries 400 Installation and Service Library.

HTH

At 02:06 PM 3/13/02 -0600, you wrote:
>This is a multi-part message in MIME format.
>--
>[ Picked text/plain from multipart/alternative ]
>Id like to start off by saying that I am a real AS400 newbie. My ten
>years experience with computers is pretty much PC related. Im fairly
>compotent but I have only been working with this company that uses
>AS400s since september.
>
><Background>
>
>  Currently, they are trying somewhat to phase out terminal connectivity
>via twinax cable to at least PC connectivity w/ emulation cards (BOS,
>etc) via Twinax cable. However, some of the offices would benefit
>greatly from ethernet connectivity. These offices have either Model 9402
>400, Model 9401 150, or Model 9401 170. I have done the install on the
>Model 9402 400 but not any of the others. None of these machines in any
>of the offices (except one) have ethernet cards in them and they have
>been not-allowed up until last week. Now, I am getting requests upon
>requests to install these cards and get them setup. Unfortunatly when I
>setup the 9402 400, I was under contract to not record the commands I
>used, and we also were forced at that time to use DLC.
>
><What I am trying to find out>
>
>I have not been able to find (even with the help of the great google) a
>good step by step guide on what I need to do. I really do the PC work
>for this company but they have no as400 specialists (their team is in CA
>and stays in CA) and there are no AS400 specialists or even compotent
>IBM certs around here either! If anyone could link me to a very complete
>guide (Sadly, it should include this is how you bring the as400 down so
>as to be ready to install the ethernet card - to what commands to issue
>to vary the card on and set the IP address, etc). If such a guide does
>not exist - im interested in compiling such a guide with help.
>
>I apriciate your help and your patients with an as400 n00b.
>
>--
>
>_______________________________________________
>This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
>To post a message email: MIDRANGE-L@midrange.com
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>or email: MIDRANGE-L-request@midrange.com
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/midrange-l.
--