RE: Asynch autodial out

["Andy Nolen-Parkhouse" <aparkhouse@xxxxxxxxxxxx>]

Jeff,

You certainly can do IP over an asynch connection.  I would check out
the documentation for creating a PPP connection using Operations
Navigator.  AFAIK, the configuration _cannot_ be created using green
screen commands.

The link below gives some information from the InfoCenter, probably the
best source on this topic.

http://publib.boulder.ibm.com/html/as400/v5r1/ic2924/index.htm

Regards,
Andy Nolen-Parkhouse

> ... it has occured to me that I will probably not be able to run IP or
> APPC
> over an asynch connection ?
>
> Jeff B
>
>
> Hi all,
>       I've had a nose through the archive, there was a thread 16
months
> ago on this
> subject, but it didn't have a particularly good match for my problem
...
>
>       a) I have an asynchronous modem attached to a V.24 port on my
> AS/400;
>       b) I want to use it to automatically transfer a (small) file to
a
> remote AS/400;
>       c) I guess I need to configure an Asynch Line, Controller and
Device
> for it;
>       d) I would like to be able to use a DDM file, or perhaps FTP to
do
> the transfer, as
>           I plan to use a CL program to control the process (RPG is
not an
> option).
>
> Can someone point me in the right direction for the config and most
> appropriate transfer
> technique ?  I've also had a look in the manuals and redbooks ... no
luck.
>
> Kind Regards,
>
> Jeff Bull