× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: RE: hardware question regarding config PPP connections
  • From: "Andy Nolen-Parkhouse" <aparkhouse@xxxxxxxxxxxx>
  • Date: Fri, 13 Jul 2001 06:24:11 -0400
  • Importance: Normal

Carl,

According to the V4R1 System Builder, the #2699 is supported on the model
400.  However, it would require a #2629 LAN/WAN IOP.  This could then
require you to replace your #2623 LAN/WAN IOP with a #2629.  I can't vouch
for the entire configuration, but it looks like a straight swap of the #2623
for a #2629 and the #2699 for the #2609.  From the looks of the
documentation, you would need to replace all three of your #2609's.

Andy Nolen-Parkhouse
ISeries Solution Expert, V4R5

-----Original Message-----
From: owner-midrange-l@midrange.com [mailto:owner-midrange-l@midrange.com]On
Behalf Of Carl Galgano
Sent: Thursday, July 12, 2001 9:18 PM
To: Midrange List
Subject: FW: hardware question regarding config PPP connections

anyone know if the 2699 will work in a model 400.  The rest of the hardware
appears to be PCI which obviously does not mean the model 400.
cjg


Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax

"You ain't gonna learn what you don't want to know" - rw

One of the below Input Output Adapters (IOA) must be installed in order to
configure PPP.


2699 - - Two-line WAN IOA
2720 - - PCI WAN/Twinaxial IOA
2721 - - PCI Two-line WAN IOA
2745 - - PCI Two-line WAN IOA
2750 - - PCI ISDN BRI U IOA (2-wire interface)
2751 - - PCI ISDN BRI S/T IOA (4-wire interface)
2761 - - 8 port analog modem IOA

...Neil

----- Forwarded by Neil Palmer/DPS on 2001/07/12 18:39 -----


Neil Palmer
2001/07/12 18:08

The message is correct.  2609's & 2612's do not support PPP.
You would be restricted to a SLIP connection.
I don't believe there is any comm hardware for a model 400 that supports
PPP.

Neil Palmer      DPS Data Processing Services Canada Ltd.


I am trying to configure a PPP connection using Ops Navigator.  I have
does
many of these in the past with no problem.  I am trying to configure a
model
400 at V4R4 and when I try to create a new line description (again in OPs
navigator), I get an error saying that the hardware in the machine does
not
support creating a PPP line desc.  Below are the comm cards I have in this
box, I had hoped to use CMN03.  Can anyone verify this to be a problem, if
it is what hardware for a model 400 do I need?

Regards,
cjg

Opt  Resource        Type  Status                Text
     CMB01           918B  Operational           Combined function IOP
       LIN01         2612  Operational           Comm Adapter
         CMN02       2612  Operational           V.24 Port
       LIN02         2612  Operational           Comm Adapter
         CMN03       2612  Operational           V.24 Port
     CC02            2617  Operational           Combined function IOP
       LIN06         2617  Operational           LAN Adapter
         CMN09       2617  Operational           Ethernet Port
       LIN07         605A  Operational           Virtual Controller
     CC01            2623  Operational           Comm Processor
       LIN03         2609  Operational           Comm Adapter
         LIN011      2609  Operational           V.24 Port Enhanced
         LIN012      2609  Operational           V.24 Port Enhanced
       LIN04         2609  Operational           Comm Adapter
         CMN05       2609  Operational           V.24 Port
         CMN06       2609  Operational           V.24 Port Enhanced
       LIN05         2609  Operational           Comm Adapter
         CMN07       2609  Operational           V.24 Port
         CMN08       2609  Operational           V.24 Port


Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.