RE: hello, world

["Andy Nolen-Parkhouse" <aparkhouse@xxxxxxxxxxxx>]

Zetan,

From your description, the system is up and running.  If true, this
would leave you with two possibilities:

1) Your connection is not good and you need to troubleshoot your
connection, including the integrity of the cable and any potential
cable-through (line termination) problems.

2)  The other possibility is that the console cannot establish an
interactive session.  Because the console and other interactive devices
can utilize different memory pools and/or job characteristics, try
changing the port of the device (just plug it into a different port on
the controller brick).  If the machine is up, it does not need a console
so you can move your workstation to a different address.  You have not
said so, but I am assuming that you only have the one workstation
device.

Andy

> -----Original Message-----
> From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]
> On Behalf Of Zetan Gelbard
> Sent: Thursday, July 19, 2001 7:14 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: hello, world
> 
> > where is the cursor on the blank console dsply.
> 
> Upper left. There is a 'connection box' light on the
> bottom of the terminal.
> 
> > is there an amber attention light that is lit on the system?
> 
> Nope, no ref codes.
> 
> > what shows in the led display on the front panel?
> 
> 01 A (the IPL choice).
> 
> > is the processor light blinking?
> 
> Yes it surges & flickers.
> 
> > how much time are you waiting before hitting the panic button?
> 
> Several days ;)
> 
> A couple times I got the ref code (from memory), A6005004,
> which according to the ref book, a 'could not find system console'
> error. Followed the twinax diag procedure, but did not discover
> anything. The ref code has gone away recently (tried many cycles).
> 
> zetan
> 
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-
> UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---