× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Why can't a 620-2175 be directly upgraded to an 820-2435?
  • From: MWalter@xxxxxxxxxxxxxxx
  • Date: Thu, 24 May 2001 15:51:21 -0400


I'm not sure about that. We have the same serial number in our 720 that we
had in our B20. There have been 3 upgrades between them. I think Jim is
correct. It's all about marketing.

Just my 2 cents.

mark



Mark Walter
Sr. Programmer/Analyst
Hanover Wire Cloth a div of CCX, Inc.
mwalter@hanoverwire.com
http://www.hanoverwire.com
717.637.3795 Ext.3040


                                                                                
                                         
                    "Chuck Morehead"                                            
                                         
                    <cbmorehead@nokuse.        To:     
<MIDRANGE-L@midrange.com>                                         
                    com>                       cc:                              
                                         
                    Sent by:                   Subject:     Re: Why can't a 
620-2175 be directly upgraded to an          
                    owner-midrange-l@mi        820-2435?                        
                                         
                    drange.com                                                  
                                         
                                                                                
                                         
                                                                                
                                         
                    05/24/01 03:32 PM                                           
                                         
                    Please respond to                                           
                                         
                    MIDRANGE-L                                                  
                                         
                                                                                
                                         
                                                                                
                                         




Jim,

I think you are mostly correct.  However, there is an accounting issue.
Since you retained the serial number the AS/400 is still the same asset on
your books.  If you replace the AS/400 then you get a new serial number and
a new asset on the books.  I believe the IRS has rules on how much of the
old hardware must exist in the new system to be considered the same asset.
If there are any CPA's in the group they could probably give a better
description, but from my understanding this is a tax/depreciation issue
that can impede you from doing an "upgrade."  However, I do not know if
this specific upgrade would be affected by this.

Chuck
 ----- Original Message -----
 From: Jim Damato
 To: 'MIDRANGE-L@midrange.com'
 Sent: Thursday, May 24, 2001 1:39 PM
 Subject: RE: Why can't a 620-2175 be directly upgraded to an 820-2435?

 Somebody please correct me if I'm wrong, but it's been my understanding
 that upgrade paths have little to do with anything other than marketing.
 When we upgraded our 530 to a 650 we retained the serial number and a few
 network cards and controllers.  There are no technical criteria for a
 model's upgrade path..  I believe that there's no good reason for the
 limitation.  IBM defines upgrade paths based on how they want to price the
 AS/400.



 James Damato
 Manager - Technical Administration
 Dollar General Corporation
 <mailto:jdamato@dollargeneral.com>


      -----Original Message-----
      From: Glenn Ericson [mailto:Glenn-Ericson@att.net]
      Sent: Wednesday, May 23, 2001 1:57 PM
      To: MIDRANGE-L@midrange.com
      Subject: Re: Why can't a 620-2175 be directly upgraded to an
      820-2435?


      At 02:13 PM 05/23/2001 -0400, you wrote:
           Does anyone know why a 620-2175 can't be directly upgraded to an
           820-2435
           (1523)?  If so, could you please provide an explanation?
           Apparently, the
           configurator forces a double upgrade (first to an 820-2395 or
           820-2396 then
           to the 820-2435).  Thanks.




           Diana Hicks
           Town of Jupiter
           dianah@jupiter.fl.us


           +---
      Sounds  like  it is dragging you through the old 820 series then on
      to the SStar series




      Glenn
      __________________________________
      Glenn Ericson,  IBM Certified Specialist
      Phoenix Consulting LLC, East Elmhurst, NY USA
      Phone 718 898 9805
      mailto:Glenn-Ericson@att.net
      ___________________________________



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.