• Subject: Re: Remote printer problem
  • From: "Avi Hecht" <avi_hecht@xxxxxxxxxxx>
  • Date: Mon, 6 Nov 2000 19:46:47 +0200

Thanks Jeffrey,
Avi
----- Original Message -----
Sent: Sunday, November 05, 2000 8:21 PM
Subject: Re: Remote printer problem

 
    Those PTF's were all for 4.4 Issues.  That's where I would start...  Will let you know if I find anything else. 
 
----- Original Message -----
From: Avi Hecht
Sent: Sunday, November 05, 2000 12:22 PM
Subject: Re: Remote printer problem

Hi Jeffrey,

Thank you for your input,
I am talking of release V4R4M0
It looks like the printer is using
the drawers at random .
If I change the spool file to drawer 2
it feeds from drawer 1 which is A4 paper
If I change the spool file to deawer 3
it stops with attention drawer 3 is A3 paper
on other drawers it stops with message load letter
I think I am going to retreive the driver and customize it
scs=yes.
 
Thanks again and I welocome your opinion.
Avi
 
 
 
----- Original Message -----
Sent: Saturday, November 04, 2000 8:26 PM
Subject: Re: Remote printer problem

Avi,
 
    You don't say what release.  But I just went through a project on 4.4 with the InfoPrint 21 and had to apply many PTF's to get things
working okay, and there are still issues for which PTFs are pending.  As I understand it the issue is being caused by a new print engine in the product line that has resulted in numerous changes to the way the ISeries/400 drives the device.
 
    Look at the following;

SF63950, MF25055, SP63920, SF63854, SF63844, SF55237, SF59895, SF63673, SF62773, MF23611, SF63673, SF62933

    And others released since early October.

 

----- Original Message -----
From: Avi Hecht
Sent: Saturday, November 04, 2000 3:48 AM
Subject: Remote printer problem

Hi,
 
I have a IBM printer type InfoPrint attached to the net
and configured as an remoute outq on the AS/400
with setting of *IBM4332 and outq name 'TEXT'
 
Ping to printer is ok but if I print the spool file it goes
into SND and evaporates but nothing comes out on the printer .
 
Second to direct the output to a specific tray is it enough to
do chgsplfa to the drawer I want or do I have to OVRPRTF in
the program that produces the spool file , There are five trayes
 
Thanks,
Avi

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact [javascript protected email address].