Re: Problem with INS on new 270

[Larry Bolhuis <lbolhuis@xxxxxxxxxx>]

Art,

 Actually since the adaptors are the same for both the AS/400 and the
INS if you simply move te card to the correct slot it'll run for the
AS/400 instead.  You will want to carefully read the rules for card
placement in the System Builder.

 As to running W2K or NT those will happily run TCP/IP for their own
use. But unless you 'get cute' and route all your AS/400 data via the
internal TCP/IP 'token-ring' to the NT which is configured to forward
TCP/IP traffic you won't be able to contact the OS/400 via those
servers.

 - Larry

"Art Tostaine, Jr." wrote:
> 
> I figured it was something like that.  Thanks for your reply.  We have an
> ethernet adapter on order, but that's not due in until next month.
> 
> Chalk our error up to the new e-config program.  We had no training and it
> is horrible.
> 
> Once I get the other adapter running, Can I configure Win2k or WinNt on the
> INS and then the INS will run TCP/IP?
> 
> Thanks again.
> 
> Art Tostaine, Jr.
> CCA, Inc.
> Jackson, NJ 08527
> 
> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Larry Bolhuis
> Sent: Tuesday, September 19, 2000 1:38 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: Problem with INS on new 270
> 
> You have a problem.  You can no longer run AS/400 TCP/IP or other
> communications through the new INS on the 270 or 8xx systems. Since the
> 270 supports ONLY the new INS you are stuck.  Type *BASE is not
> supported on the 700MHz INS. (It's OS/2 you know and we wouldn't want to
> support that!)
> 
>  - Larry
> 
> "Art Tostaine, Jr." wrote:
> >
> > I am trying to configure a new model 270 ethernet line.  It does not have
> a
> > dedicated ethernet port, just a two port INS.
> >
> > I did a CRTNWSD with type of *BASE, then did a CRTLINETH and used the
> *NWSD
> > as the resource name.
> >
> > When I try to vary on the INS, I get CPD8FFF, with a reason code 0000000D.
> > The message details are:
> >
> > Error occured initializing network server BASE.
> > -0000000d: Hardware resource information error
> >
> > When I created the NWSD I used resource name LIN02, which is type 2890
> File
> > Server IOA.  I have also tried using CC01, but that didn't work either.
> >
> > Any help is appreciated.
> >
> > Art Tostaine, Jr.
> > CCA, Inc.
> > Jackson, NJ 08527
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> 
> --
> Larry Bolhuis         |
> Arbor Solutions, Inc  |  IBM AS/400e - Get There First!
> (616) 451-2500        |
> (616) 451-2571 -fax   |  It's 10PM.  Has your NT Server had it's
> lbolhuis@arbsol.com   |  therapeutic re-boot yet today?
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
Larry Bolhuis         |  
Arbor Solutions, Inc  |  IBM AS/400e - Get There First!
(616) 451-2500        |  
(616) 451-2571 -fax   |  It's 10PM.  Has your NT Server had it's
lbolhuis@arbsol.com   |  therapeutic re-boot yet today?
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---