Re: Problem with INS on new 270

[Larry Bolhuis <lbolhuis@xxxxxxxxxx>]

Model 400's would be running FSIOPs or at best the 333 SPD packaged INS.
Both of those support *BASE (and will still run OS/2 Lanserver and
Netware too!)

 - Larry

Chris Bipes wrote:
> 
> My NWSD for a model 400 under 4.4 is also a base.  I configured to not start
> TCP/IP and not start NetBios.  I did not configure the TCP/IP parms, just
> the basics.
> 
> Here is the display of the NWSD:
> Network server description . . . . :   NWSD        NWS01
> Option . . . . . . . . . . . . . . :   OPTION      *BASIC
> 
> 
> 
> Resource name  . . . . . . . . . . :   RSRCNAME    CC02
> Network server type  . . . . . . . :   TYPE        *BASE
> Online at IPL  . . . . . . . . . . :   ONLINE      *YES
> Vary on wait . . . . . . . . . . . :   VRYWAIT     *NOWAIT
> Language version . . . . . . . . . :   LNGVER      2924
> Country code . . . . . . . . . . . :   CNTRYCODE   1
> Code page  . . . . . . . . . . . . :   CODEPAGE    850
> NetBIOS description  . . . . . . . :   NTB         QNTBIBM
> Start NetBIOS  . . . . . . . . . . :   STRNTB      *NO
> Start TCP/IP . . . . . . . . . . . :   STRTCP      *NO
> Server message queue . . . . . . . :   MSGQ        *JOBLOG
>   Library  . . . . . . . . . . . . :
> Configuration file . . . . . . . . :   CFGFILE     *NONE
>   Library  . . . . . . . . . . . . :
> Synchronize date and time  . . . . :   SYNCTIME    *YES
> Text . . . . . . . . . . . . . . . :   TEXT        *BLANK
> 
> Network server description . . . . :   NWSD        NWS01
> Option . . . . . . . . . . . . . . :   OPTION      *PORTS
> Ports  . . . . . . . . . . . . . . :   PORTS
> 
> 
> 
> -----Attached lines------
> Port           Attached
> number         line
> 1              ETH01
> 
> The rest is all *NONE.
> 
> Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
> Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
> CrossCheck, Inc.        http://www.cross-check.com
> 6119 State Farm Drive   Phone: 707 586-0551 x 1102
> Rohnert Park CA  94928  Fax: 707 586-1884
> 
> If consistency is the hobgoblin of little minds, only geniuses work here.
> Karen Herbelin - Readers Digest 3/2000
> 
> -----Original Message-----
> From: Art Tostaine, Jr. [mailto:art@link400.com]
> Sent: Tuesday, September 19, 2000 9:56 AM
> To: midrange-l@midrange.com
> Subject: Problem with INS on new 270
> 
> I am trying to configure a new model 270 ethernet line.  It does not have a
> dedicated ethernet port, just a two port INS.
> 
> I did a CRTNWSD with type of *BASE, then did a CRTLINETH and used the *NWSD
> as the resource name.
> 
> When I try to vary on the INS, I get CPD8FFF, with a reason code 0000000D.
> The message details are:
> 
> Error occured initializing network server BASE.
> -0000000d: Hardware resource information error
> 
> When I created the NWSD I used resource name LIN02, which is type 2890 File
> Server IOA.  I have also tried using CC01, but that didn't work either.
> 
> Any help is appreciated.
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
Larry Bolhuis         |  
Arbor Solutions, Inc  |  IBM AS/400e - Get There First!
(616) 451-2500        |  
(616) 451-2571 -fax   |  It's 10PM.  Has your NT Server had it's
lbolhuis@arbsol.com   |  therapeutic re-boot yet today?
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---