RE: Upgrade to a 270

["Art Tostaine, Jr." <art@xxxxxxxxxxx>]

I'm going to do what you did.  I'll save some steps because we have a CLP to
create/recreate the system values, subsystems, etc.  I've got the thing
powered up and working.  I'm going to restore our libraries soon.

Art Tostaine, Jr.
CCA, Inc.
Jackson, NJ 08527

-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of Chris Bipes
Sent: Wednesday, September 06, 2000 4:33 PM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: Upgrade to a 270


I did not upgrade but Installed a new AS400 by first added the necessary
user profiles manually.  Then creating the subsystems manually.  The job
queues, out queues... This took lots of time.  Then I restored our
application libraries and data libraries.  I had to configure the whole
system from scratch, what a PAIN.  But I replaced a CISC 3.2 system with a
4.4 RISC system without going to 4.3 first.  The 170 came with 4.4 and we
did not have 4.3.  This was a new box not an upgrade even though we replaced
the CICS with it.  So if you are not upgrading, you can install/restore your
user applications to the 270 and there is NO road map for this.  Lots of
work! Very clean install ;>)

Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.        http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park CA  94928  Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000


This is crazy!  I've ordered a brand new 270.  I don't want to migrate
anything over EXCEPT my user program and data libraries.  Why do I have
to
go through a 100 page roadmap and 270 page software installation guide?

I should just be able to turn on the 270, and do RSTLIB's.  Why is this
process so difficult?  My source 400 is on V4R4.   Why can't a 270 that
has
V4R5 just restore previous libraries?

If I want to restore a customers tape from V4R2, I can't?!?

There has got to be support for restoring customer data from previous
releases in V4R5!

Art Tostaine, Jr.
CCA, Inc.
Jackson, NJ 08527
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---