Re: Ethernet switch question

[Philipp Rusch <Philipp.Rusch@xxxxxxxxxxxx>]

Hello Pamela,

what kind of switch is this ?
is it manageable in any way ?

we had problems with "learning" switches that used to "forget" about
the mac adress of the attached AS/400 so that SNA / DLC connections
failed after a certain period.
Maybe the reset of your switch does something equally.

Regards from germany, Philipp Rusch

 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,                                                |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------
 

Pamela Phillips schrieb:
> 
> The 10Base adapter on our 400 is plugged into an Ethernet switch. We have had
> occasional power glitches or other problems that require us to reset the
> switch. When we do this, the only device on the network that even notices is
> the AS400. It throws a CPA58EE error and puts the line into recovery
> pending.  The only way we've been able to get things going again is to end
> TCP, vary off the line, vary on the line, and restart TCP. Fortunately, this
> doesn't happen very often, but it's pretty disruptive when it does.
> Is there a setting I should change on the line so it's not so sensitive?
> Also, we're planning to upgrade to a 100base adapter. Will it act any
> differently?
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---