Re: Hayes Autosync

Pat,

I'm missing a few bits here (more than usual!)...  Pls refresh
memory...What the heck are you trying to do?  Dial into a as/400 via ecs
with a autosync card???   Or what?

Don

On Fri, 15 May 1998, Pat Barber wrote:

> Don wrote:
> > 
> > DO NOT USE THE 56kb PCMCIA HAYES OPTIMA!  IT HAS SOME MAJOR AUTOSYN
> > PROBLEMS!!!!!  AS IN IT MAY NOTBE THERE!  The lower speeds seem to be
> > fine...also there's some generic brands that work well..
> 
> I got the damn thing to dial at last....... now the 400 is complaining
> about
> controller not known to local system CPI5909 option 03....
> 
> I am STILL confused.... Do you need:
> 
> 1. Line description & controller
> 2. Line description w/ no controller ?????
> 3. If you need a controller ,,, what are the paramters ??????
> 
> By the way
> 
> PC 4.1 is flakey as hell and the "manual" is a piece of garbage......
> 
> After I finally got it to dial, after each failure, it tells me com port
> is invalid !!!! Reboot and everything is OK again !!!!!
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> 

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---