|
At 07:33 AM 7/23/97 -0000, you wrote: >I am in the beginning stages of planning the move from a D80 and D70, both at >v3r2, to RISC boxes. I loaded the Upgrade Assistant kit on both systems, and >ran the option to gather all upgrade information. It completed normally. > >Now when I try the next step in the Roadmap (task QB010 - Print disk usage >information), all I get is a message stating: 'Enhanced Upgrade Assistant for >OS/400 task QB020 failed.' Help supplies this additional info: > > Additional Message Information > >Message ID . . . . . . : CPFA95B Severity . . . . . . . : 40 >Message type . . . . . : Diagnostic >Date sent . . . . . . : 07/23/97 Time sent . . . . . . : 07:25:17 > >Message . . . . : Enhanced Upgrade Assistant for OS/400 task QB020 failed. >Cause . . . . . : Errors occurred with task QB020. >Recovery . . . : See the previously listed messages in the job log. > >The job log looks like this: > > Display All Messages > System: AS400 >Job . . : QPADEV0003 User . . : QSECOFR Number . . . : 910799 > >3>> go upgrade2 > Enhanced Upgrade Assistant for OS/400 task QB020 selected. > Receiver value too small to hold result. > Enhanced Upgrade Assistant for OS/400 task QB020 failed. > >I get the same result on both systems. I just received the Roadmap and Upgrade >tape a couple of weeks ago, so they should be recent. It's the only option I've >run across yet that doesn't work. Any ideas? > > >---------------------------------------- >John Swartzendruber >Mennonite Mutual Aid, Inc >johnbs@mma-online.org > There are PTF's that correct problems to the Enhanced Upgrade Assistant, both on the CISC side and the RISC side. Details of these PTF's are found in the cover letter SF98151. For V3R2 the PTF is SF40861. Once you load and apply this PTF, option QB010 will run correctly. There is a step in the roadmap which tells you when to load the EUA on RISC, and you should load/apply the RISC PTF for EUA once the EUA has been loaded. It is an immediate PTF. You should order this PTF on your CISC machine and then save it to the media that your RISC machine will support. This is because at the point in the upgrade process that you want to load this PTF, ECS will not be available on the RISC machine. The SF98151 PTF also contains details of any corrections in the roadmap and any critical save/restore PTF's that are needed. Remember, when "Following the Roadmap", make sure that it includes the corrections. Neil Clark Barsa Consulting, LLC (914) 251 9400 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is the Midrange System Mailing List! To submit a new message, * * send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * * this list send email to MAJORDOMO@midrange.com and specify * * 'unsubscribe MIDRANGE-L' in the body of your message. Questions * * should be directed to the list owner / operator: david@midrange.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
