Re: EDI Software with off-the-selfIntegrationtoBPCS 4.05CD...

Tom,

That's a neat solution for avoiding ECM, but the architecture of order
entry changed significantly between V4.05 and V6.x. I don't think there
were ECHW, ECLW files at V4.05.

ORD500 dealt directly with ECH/ECL - with the help of some nasty
subfiles - if I remember correctly.


DeeDee,

Bite the bullet and go for ERP LX :-)  It's looming in my future too and
the more that blaze the trail for me the better ;) 


Doug McLauchlan



-----Original Message-----
From: bpcs-l-bounces+doug.mclauchlan=planar.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+doug.mclauchlan=planar.com@xxxxxxxxxxxx] On
Behalf Of Molyneux, Tom
Sent: Monday, February 05, 2007 9:01 AM
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] EDI Software with off-the-selfIntegrationtoBPCS
4.05CD...

DeeDee,

We have another application that takes quotes from an in-house Quotation
System and converts them to BPCS orders.

We do this as follows :

1.      The Quote System retrieves the next BPCS Order Number and loads
the Quote data into the BPCS Order Entry Work Files     (ECHW, ECLW and
ESNW)

2.      It writes the Order Number to a control file.

3.      We have a program (ORDM810) that reads this control file every
60 seconds and processes any Order Number not yet       flagged
asprocessed.

4.      The program submits another in-house program (ORDM701) with the
Order Number as a parameter. 
        This sets up the parameters and LDA required for ORD701
(standard BPCS Order Post) to run and then calls ORD701 via     SYSOVRC.

It all works very well and no ECM in sight !

Our programs are obviously tailored towards how we work, but I'm sure if
you can get your incoming data onto ECHW, ECLW and ESNW the general idea
would work for you too.

If you would be interested in the source of any programs, let me know
offline and I'll send you some code.

Tom Molyneux

National Oilwell Varco
Mono Pumps Limited
MIS Department

Tel.     0161 214 2142
Fax.     0161 214 2344
E:mail  Tom.Molyneux@xxxxxxx
        tmolyneux@xxxxxxxxxxxxxx


-----Original Message-----
From: bpcs-l-bounces+tmolyneux=mono-pumps.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+tmolyneux=mono-pumps.com@xxxxxxxxxxxx] On Behalf
Of DeeDee Virgei
Sent: 05 February 2007 16:36
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] EDI Software with off-the-self IntegrationtoBPCS
4.05CD...

Thank you Phil and Tom for replying.  Both your inputs are very helpful.
The staff here is also doing more with the Microsoft .NET tools and ODBC
to extract data from the i5.  We also use the CPYFRMIMPF a lot to import
data, along with some trigger programming...  With your suggestions and
our experience, getting EDI transactions to and from the i5 should not
be a problem for us.  Where I am really stuck though, is getting the
data to/from BPCS without the ECM module.  Extracting shouldn't be too
difficult; we already send ASNs via email with a trigger program against
the BBL file...

I believe my only two choices are the following:
1) upgrade our BPCS version so that we can get the ECM module.  And, if
we're going to upgrade, we might as well go all the way to LX 8.4 ~Phil,
glad to hear (that you heard) integrations has improved in LX.
2) Start digging into customizing ORD500 or continue to screen scrap
into ORD500...

Best Regards,

DeeDee Virgei
Project Leader

Nelson Stud Welding, Inc.

-----Original Message-----
From: bpcs-l-bounces+deedee.virgei=nelsonstud.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+deedee.virgei=nelsonstud.com@xxxxxxxxxxxx] On
Behalf Of Phil.Catlin@xxxxxxxxxxx
Sent: Monday, February 05, 2007 8:18 AM
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] EDI Software with off-the-self Integration toBPCS
4.05CD...

DeeDee...

I have yet to find any package with built-in integrations to BPCS...
Even the horrible product that SSA sold to Harbinger, then bought
back...(It's now FINALLY dead...) didn't have anything pre-built!!!

That said, any of the mainstream i5 / iSeries / AS/400 translator
products will integrate fairly easily.  Most can import the DDS to a
file with a few menu steps, Then its simply a matter of mapping to your
customer's specifications.

We're also on version 6 of BPCS so we have the ECM as an inbound
interface.  I've written my own outbound interfaces however since I
don't care for the way ECM works in that direction.  I would be happy to
go into more detail off-list if you are interested...

If you move to LX, the integrations are better (so I'm told by my infor
rep...)

Phil Catlin



"DeeDee Virgei" <DeeDee.Virgei@xxxxxxxxxxxxxx> Sent by:
bpcs-l-bounces+phil.catlin=formica.com@xxxxxxxxxxxx
02/02/2007 05:19 PM
Please respond to
"SSA's BPCS ERP System" <bpcs-l@xxxxxxxxxxxx>


To
<bpcs-l@xxxxxxxxxxxx>
cc

Subject
[BPCS-L] EDI Software with off-the-self Integration to BPCS 4.05CD...






Hi All,

Anyone out there still on BPCS 4.05 CD w/ an EDI package that imports
orders and exports shipments (ASNs) somewhat automatically to & from
BPCS?  Ideally, I'd like to purchase EDI software that comes with an
off-the-shelf interface to/from BPCS 4.05 CD... 

We are considering going to LX 8.4, then acquiring ECM ~just looking at
other alternatives.  Our EDI orders are makeup less than 10% of our
sales, but the few trading partners we do interact via EDI, are key to
our company...  Any input would be appreciated.  Thank you.

Best Regards,

DeeDee Virgei
Project Leader

Nelson Stud Welding, Inc.
--
This is the SSA's BPCS ERP System (BPCS-L) mailing list To post a
message email: BPCS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/bpcs-l.

Delivered-To: phil.catlin@xxxxxxxxxxx

--
This is the SSA's BPCS ERP System (BPCS-L) mailing list To post a
message email: BPCS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/bpcs-l.

Delivered-To: deedee.virgei@xxxxxxxxxxxxxx

--
This is the SSA's BPCS ERP System (BPCS-L) mailing list To post a
message email: BPCS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/bpcs-l.

Delivered-To: tmolyneux@xxxxxxxxxxxxxx

--
This is the SSA's BPCS ERP System (BPCS-L) mailing list To post a
message email: BPCS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/bpcs-l.

Delivered-To: doug.mclauchlan@xxxxxxxxxx

______________________________________________________________________
This e-mail has been scanned by MCI Managed Email Content Service, using
Skeptic(tm) technology powered by MessageLabs. 
______________________________________________________________________

______________________________________________________________________
This e-mail, and any attachments, is intended only for use by the addressee(s) 
named herein and may contain legally privileged and/or confidential information 
belonging to Planar Systems, Inc.  If you are not the intended recipient of 
this e-mail, you are hereby notified that any dissemination, distribution or 
copying of this e-mail, any attachments thereto, and use of the information 
contained, is strictly prohibited.  If you have received this e-mail in error, 
please notify the sender and permanently delete the original and any copy 
thereof.
______________________________________________________________________