MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » July 2014

HSCL3625-The dynamic add operation cannot be performed. Adding 1.5 processing units to the partition in shared processor pool 1 will exceed the maximum processing units of the shared processor pool.



fixed

Server-8286-42A
Virtual Resources
Shared Processor Pool Management
Pool Name Pool ID Reserved Maximum
DefaultPool 0 N/A N/A
IBMi 1 9.00 10

2 lpars of vios
1 lpar of AIX
5 lpars of IBM i:
Min Asn Max Shared
NAME LPAR CPU CPU CPU Pool
RACK1HST 3 0.10 0.50 1.00 IBMi Uncapped
GDWEB 4 0.10 0.50 1.00 IBMi Uncapped
GDIHQ 5 2.00 4.75 6.00 IBMi Uncapped
GDISYS 6 0.50 1.25 2.00 IBMi Uncapped
MAIL1 7 0.50 2.00 3.00 IBMi Uncapped
Total 3.10 9.00 13.00
RACK1HST and MAIL1 are the only active IBM i partitions at this time, or
ever have been on this new Power 8

Current properties, not profile properties, for MAIL1 are:
Processing Units
Minimum: 0.50 Sharing mode: Uncapped
Assigned: 0.50 Weight: 128
Maximum: 3.00 Shared processor pool: IBMi (1)

Tried to dynamically lpar MAIL1 and add 1.5 processors and I get:
The dynamic partitioning operation failed. - MAIL1
The dynamic add operation cannot be performed. Adding 1.5 processing units
to the partition in shared processor pool 1 will exceed the maximum
processing units of the shared processor pool.
HSCL3625



Rob Berendt





Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact