I don't know if a processor group will work in this case because ordinarily
the license program is set to run in a processor group. Having not tried to
push the QZDASOINIT and/or QSQSRVR jobs into one, I don't know if it can be
done (Domino and WAS can be pushed into one).

Look into processor groups, only because you have more than one processor.

Also in your performance investigations remember to look at index activity.
Unless this box is just stressed with workload, I usually find quite a bit
of temporary index activity in situations like the one you describe. You
should also see quite a bit of I/O activity on the disk units if indexing is
going on too.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Sent: Thursday, May 22, 2014 8:47 AM
To: Midrange Systems Technical Discussion
Subject: Re: Running jobs on a separate core

Now there's an oxymoron: "new 400".

I don't believe there is a way to dedicate out processors like you can
memory. With memory, you can bust it up into subsystems and whatnot. This
has been around since, well, back on 400's.
About the only way to dedicate processors is to create separate partitions.

Rob Berendt
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755

From: Brian Piotrowski <bpiotrowski@xxxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion (midrange-l@xxxxxxxxxxxx)"
Date: 05/22/2014 09:26 AM
Subject: Running jobs on a separate core
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>


In the next month or so our new 400 will be delivered to us. The new box
will have two cores because right now our single core machine is being
crushed by the QZDASOINIT jobs (they occupy anywhere from 75% - 90% of the
CPU utilization at any given time).

Yes, we are investigating the reasons why these jobs are occupying so
much, but I wanted to know if there's a way I can dedicate a core to a
specific job or subsystem? I would like to move the web jobs off to their
own core so the other core can focus on taking care of the other tasks.

Any advice or recommendations would be appreciated.



Brian Piotrowski
Manager - I.T.
Simcoe Parts Service, Inc.
Ph: 705-435-7814 x343
Fx: 705-435-5029

Please consider the environment. Don't print this e-mail unless you really
need to.

The information contained in this communication is confidential and
intended only for the use of those to whom it is addressed. If you have
received this communication in error, please notify me by telephone
(collect if necessary) and delete or destroy any copies of it. Thank

This thread ...


Return to Archive home page | Return to MIDRANGE.COM home page