RE: OS 400 upgrade

Pete,

I would add to this a reminder that the CUM's are not shipping by default
with your PID CD's for the release upgrade anymore.  ALOT of people are
still used to getting their CUM's with the PID... You have to order your
CUM's seperate...  and YOU have to order them...

Don in DC...packing for Toronto...



On Wed, 13 Oct 2004, Pete Massiello wrote:

> You will need to first upgrade your 820 from V4R4 to V5R2 and THEN to
> V5R3, you can't upgrade in one step, as you need to be at a Min release of
> at least V5R1 to go directly to V5R3.  Therefore its two steps.  Also,
> make sure you have a Current set of CDs for V5R3 and the latest Cum CDs.
> THen and only then when you are on V5R3 can you save the 820 and restore
> it to the 520.
>
>   Life is always so much easier when moving from one machine to the other
> and you are on the same release.
>
> Pete
>
> ---------------------------- Original Message ----------------------------
> Subject: RE: OS 400 upgrade
> From:    "MITTELHEISSER Jean Claude" <MITTELJC@xxxxxxx>
> Date:    Wed, October 13, 2004 3:41 am
> To:      "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
> --------------------------------------------------------------------------
>
> Hello,
>
> I will have something similar to do soon : Migrate from a 820 in V4R5 to a
> 520 in V5R3 (of course). Does it mean I have to migrate my 820 first in
> V5R2 before saving and restoring on 520 ? Is there a simplier way in my
> case ? I thought I could simply start my 520, install LIC, OS/400 and
> LPPs, configure network and then restore CFG, PRF, *NONSYS, DLO,... from
> 820.
>
> Thanks.
>
> -----Message d'origine-----
> De : midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]De la part de Philipp Rusch Envoyé
> : samedi 9 octobre 2004 11:29
> À : Midrange Systems Technical Discussion
> Objet : Re: OS 400 upgrade
>
>
> Hello Al,
>
> comment inside :
>
> Al Barsa schrieb:
>
> >This requires a two step upgrade.  What I would do is as follows:
> >
> >1.      DSPSFWRSC *PRINT to determine which LPPs you have on V4R5. 2.
>  Determine what are the correct LPPs for V5R3.  IBM keeps changing  their
> names and designations to insure that they never get any name
> recognition.
> >3.      Double check that you have no improperly coded trigger programs.
> The best way to see which files have triggers is to do DSPFD to an output
>  file, and query the output file.
> >4.      De-install all LPPs on the system except for QGPL and QUSRSYS.
> This will save you time in the long run.  When I de-install lots of LPPs,
>  I submit batch jobs multi-threaded to do this in parallel.
> >5.      Get the latest CDs for V5R2, and install LIC, OS/400, QGPL and
> QUSRSYS.  Skip any PTF's unless required.  There is 1 PTF that you will
> need for V5R3 that comes with the V5R3 media, so put that on.
> >6.      Immediately install V5R3, and all required LPPs.  Do not say
> "Install All", because it will.  Tick off the LPPs that you want.  You
> will have to hang around during the LPP installs to "Accept License
> Agreements".  This is new for V5R3, so you may want to read up on it.
> You  cannot "Accept the License Agreements" in advance (preferred method)
> for  the LPPs, because they weren't there.
> >
> This is not quite true, the "required PTFs"  that  come on an extra
> CD-ROM give you
> a menu similar to those upgrade preparation menus when converting from
> CISC-to-RISC.
> You are able to accept the license agreement(s) from there in advance  and
> I didn't
> need to babysit that upgrade to press the F14-button to accept them on a
> one-by-one basis.
> There was a memo to users describing that process.
>
> HTH, Philipp
>
> >7       Install PTFs and go.
> >
> >It will be a long day.  I just did a V4R4 to V5R2 using comparable
> methodology, and it took 12 hours on a 720.  Based on speed of processor,
>  it could take longer, because of "Accepting the License Agreements".
> >
> >Al
> >
> >Al Barsa, Jr.
> >Barsa Consulting Group, LLC
> >
> >400>390
> >
> >"i" comes before "p", "x" and "z"
> >e gads
> >
> >Our system's had more names than Elizabeth Taylor!
> >
> >914-251-1234
> >914-251-9406 fax
> >
> >http://www.barsaconsulting.com
> >http://www.taatool.com
> >http://www.as400connection.com
> >
> >
> >
> >
> >"Condon, Mike" <M1C@xxxxxxxxxxxxxxxxx>
> >Sent by: midrange-l-bounces@xxxxxxxxxxxx
> >10/08/2004 10:49 AM
> >Please respond to
> >Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
> >
> >
> >To
> >"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx> cc
> >
> >Subject
> >OS 400 upgrade
> >
> >
> >
> >
> >
> >
> >Is an upgrade from OS400 v4r5 to v5r3 a one step process, or does it
> require
> >an intermediate upgrade, for example v4r5->v5r1->v5r3?
> >--
> >This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing  list
> >To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> >To subscribe, unsubscribe, or change list options,
> >visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> >or email: MIDRANGE-L-request@xxxxxxxxxxxx
> >Before posting, please take a moment to review the archives
> >at http://archive.midrange.com/midrange-l.
> >
> >
> >--
> >This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> >To subscribe, unsubscribe, or change list options,
> >visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> >or email: MIDRANGE-L-request@xxxxxxxxxxxx
> >Before posting, please take a moment to review the archives
> >at http://archive.midrange.com/midrange-l.
> >
> >
> >
> >
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>