RE: OS V4R5

["Dan Neal - btc group" <dneal@xxxxxxxxxx>]

Arthur,

The 384MB seems very low to me.  I was responsible for JBA on model 6xx and
7xx including a 2179.  We ran the max of 2GB and never experienced
performance problems outside of a couple of poorly written applications.  I
actually disregarded the JBA recommendation and went to the max.  Some of
the problems today are due to the fact that data has grown over the past
three years of use.  We moved the 2180 from V4R1 to V4R4 and did not see any
performance drop.

Dan Neal
btc group, llc.

-----Original Message-----
From: owner-jbausers-l@midrange.com
[mailto:owner-jbausers-l@midrange.com]On Behalf Of Arthur S. Weiner
Sent: Tuesday, December 19, 2000 3:13 PM
To: JBAUSERS-L@midrange.com
Subject: RE: OS V4R5


We had the same experience, DSPFLD problem after V4R4M0 upgrade form V4R2M0.

We have also been experiencing greatly decreased performance. We have a
9406/620/2179 with 384 MB of memory (128MB more than JBA recommended). We
have been told, recently, that we should have a minimum of 2GB to run
efficiently. The degradation, since the upgrade, seems to be in batch jobs.
Overall performance has never been terrific in any area.

Does anyone have any knowledge or experience in performance issues from V4R2
to V4R4?



-------------------------------------------
Arthur Weiner
Manager, Information Systems
S. Goldberg & Co., Inc.
20 E. Broadway
Hackensack, NJ 07601
V. 201-342-1200
F. 201-342-4405
arthur@sgfootwear.com


> -----Original Message-----
> From: owner-jbausers-l@midrange.com
> [mailto:owner-jbausers-l@midrange.com]On Behalf Of Randy Stratton
> Sent: Tuesday, December 19, 2000 1:00 PM
> To: 'JBAUSERS-L@midrange.com'
> Subject: RE: OS V4R5
>
>
> The DSPFLD phenomenon started for us when we upgraded to V4R4.
>
>
> Randy Stratton
> Director IS
> Alsons Corporation
> 517-439-1411
>
>  -----Original Message-----
> From:         Jim_Hawkins@tsss.com [mailto:Jim_Hawkins@tsss.com]
> Sent: Tuesday, December 19, 2000 9:54 AM
> To:   JBAUSERS-L@midrange.com
> Subject:      Re: OS V4R5
>
>
> As I stated before we are currently on V4R4, but we also
> experience the
> DSPFLD phenomenon that Steve describes.  We noticed this starting with
> 3.5.1 or JBA and it continues at 3.5.2b SP3.
>
>
>
>
>                     "Steve Haessler"
>
>                     <Haessler@strattec.        To:
> <JBAUSERS-L@midrange.com>
>
>                     com>                       cc:
>
>                     Sent by:                   Subject:
> Re: OS V4R5
>
>                     owner-jbausers-l@mi
>
>                     drange.com
>
>
>
>
>
>                     12/19/00 08:57 AM
>
>                     Please respond to
>
>                     JBAUSERS-L
>
>
>
>
>
>
>
>
>
> Betsy,
>      We upgraded to V4R5 on October 28.  So far, it's all
> good.  The only
> issue we have seen is a minor problem with the DSPFLD
> command.  When the
> screen is initially displayed, you only see the first field
> and must press
> F10 to display the remaining fields.  GEAC is aware of this
> but we do not
> know if this is being corrected.  We are on Version 3.5.1 SP2 standard
> using extended Production Systems on a 9406/S20.
>      As an FYI, we also use Future3 for EDI and have
> encountered one issue
> with V4R5 and AutoRelease.  There was a problem with a shipper inquiry
> function that we presented to IBM and Future3.  They are
> working to resolve
> the issue, we have programmed around it.
>      All in all, nothing major to report.
>
> Happy Holidays,
> Steve Haessler
> Strattec Security Corporation
>
> >>> BMuir@newcor.com 12/19/00 07:22AM >>>
> Has anyone upgraded to V4R5?  Any problems with JBA?
>
> Thanks,
> Betsy Muir
> Newcor, Inc.
> +---
> | This is the JBA Software Users Mailing List!
> | To submit a new message send your mail to JBAUSERS-L@midrange.com.
> | To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> JBAUSERS-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner: doug333@aol.com.
> +---
>
> +---
> | This is the JBA Software Users Mailing List!
> | To submit a new message send your mail to JBAUSERS-L@midrange.com.
> | To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> JBAUSERS-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner: doug333@aol.com.
> +---
>
>
>
> +---
> | This is the JBA Software Users Mailing List!
> | To submit a new message send your mail to JBAUSERS-L@midrange.com.
> | To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> JBAUSERS-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner: doug333@aol.com.
> +---
> +---
> | This is the JBA Software Users Mailing List!
> | To submit a new message send your mail to JBAUSERS-L@midrange.com.
> | To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> JBAUSERS-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner: doug333@aol.com.
> +---

+---
| This is the JBA Software Users Mailing List!
| To submit a new message send your mail to JBAUSERS-L@midrange.com.
| To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
| To unsubscribe from this list send email to JBAUSERS-L-UNSUB@midrange.com.
| Questions should be directed to the list owner: doug333@aol.com.
+---

+---
| This is the JBA Software Users Mailing List!
| To submit a new message send your mail to JBAUSERS-L@midrange.com.
| To subscribe to this list send email to JBAUSERS-L-SUB@midrange.com.
| To unsubscribe from this list send email to JBAUSERS-L-UNSUB@midrange.com.
| Questions should be directed to the list owner: doug333@aol.com.
+---