× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

I was hoping I could see the RRN of the record being sent. So if there are
100 records to be sent and the current record is at 90, then I know I would
have 90% complete and 10 records to go.

On Mon, Aug 22, 2022 at 12:56 PM Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx> wrote:

That's at best a SWAG (Scientific Wild A** Guess) emphasis on the Wild
Communications line conditions, other traffic on the line, DASD % busy on
both sides, (do I really need to go on?)

It's as good as you are going to get but keep in mind it could also be
wildly off too.

As to seeing the line speed that's best done at the switch/firewall. If
there is some monitoring software you could use that.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

On Mon, Aug 22, 2022 at 11:48 AM Rob Berendt <rob@xxxxxxxxx> wrote:

Check the file sizes on both systems. The size ratio could be compared
the time and figure out the remaining time.
If 75% of the file is sent in 24 hours then 24 / .75 = 32 hours total.
- 24 = 8 hours remaining.

Rob Berendt
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 7310 Innovation Blvd, Suite 104
Ft. Wayne, IN 46818
Ship to: 7310 Innovation Blvd, Dock 9C
Ft. Wayne, IN 46818

-----Original Message-----

Does anyone know how to calculate the remaining time/bytes on a file

I am FTP'ing a 185Gb to a remote system and it has been copying for more
than 24 hours. I need to be able to estimate the remaining time of the

The only information I have is the size of the file and the I/O count
I display the open files for the job.

Can I see somewhere how many bytes per minute are being copied?

TIA, Darryl Freinkel.

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2023 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.