Re: How to configure an IP for the Service Tools LAN Adapter -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

Hello Brian,

Am 20.01.2020 um 20:38 schrieb Brian Jongekryg <bej@xxxxxxxxxx>:

You're on the right track. When you pull up the list of LAN adapters, any that are currently in use (that is, Line Description configured and varied on) will not be shown in the list. Pressing F21 will show the in-use adapters and allow you to select and configure it as the service tools LAN adapter.

Thanks! Unfortunately, F21 isn't a valid key in the given SST menu.

While the adapter is in-use by a system LIND however, you will not be able to activate the service tools LAN adapter configuration. The service tools LAN adapter can share access with a system LIND (as long as it has its own IP address), but it MUST be activated before the LIND is varied on for sharing to be enabled. At IPL, that is always the sequence that occurs. After IPL, you would need to vary off the LIND, then activate the service tools LAN adapter, and then you can vary the LIND back on.

That was the culprit! Thank you *very* much!! Just curiosity: Is this documented somewhere? Where? I'm pretty sure, others will also stumble over this issue.

:wq! PoC

PGP-Key: DDD3 4ABF 6413 38DE - https://www.pocnet.net/poc-key.asc

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.