RE: Active but Unusable RMC Connections

Jim,

<Based on you "moving" the tape devices I'm guessing an earlier version of
HMC.

Just curious as to what you were referring to here.

I've always moved tape devices (actually the FC card for the tape library).
I continue to do this.
I'm now on a 7063 CR1, Version 9.1 SP 921.

Partition, Physical I/O Adapters, Select the FC card, action remove.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, April 22, 2019 8:33 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Active but Unusable RMC Connections

First off, What level of HMC? Fix pack, SP?

What level of FSP code?

Based on you "moving" the tape devices I'm guessing an earlier version of
HMC.

Lastly, no AS/400 in history has ever had an HMC attached to it. POWER 5,
6, 7, 8 and 9 have HMCs. So in your case which is it?


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Kevin
Monceaux
Sent: Sunday, April 21, 2019 10:32 PM
To: Midrange L <Midrange-L@xxxxxxxxxxxxxxxxxx>
Subject: Re: Active but Unusable RMC Connections

AS/400 Fans,

On Sun, Apr 21, 2019 at 07:39:38PM -0500, Kevin Monceaux wrote:

Does anyone have any tips on troubleshooting RMC connections. On the
HMC diagrmc shows a warning for each LPAR saying each has an active
but unusable RMC connection.

A diagrmc -m Machine Name -p LPAR Name --ip IP Address --autocorrect for
each LPAR reports that the IP address is out of sync with LparCmdRM. When I
first tried it it appeared to be using domain names instead of IP addresses,
then switched to IP addresses. It says a resync has been issued and to wait
a couple of minutes and run diagrmc again. After waiting a couple of
minutes, not to mention waiting a few minutes or more, and running diagrmc
again yields the same results.

A lspartition -dlpar shows for each LPAR:

Active:<1>, OS:<, , >, DCaps:<0x0>, CmdCaps:<0x0, 0x0>, PinnedMem:<0>

The LPARs are i hosting i LPARs, one host, three guests.