× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. December 2018

RE: HMC 7063-CR1 configuration and initial P9 power on

I don't have a partition to try it on but I believe the partition must be
deactivated, then go into profile maintenance and you should be able to
change it. Then re-activate.


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Thursday, December 13, 2018 6:34 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

IBM testing partition deleted.

Can the Partition ID be changed, I'm not seeing that option?
It appears that once ID is assigned, there is no changing it.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer
Sent: Wednesday, December 12, 2018 7:55 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

No, the server is not considered a partition. That's a partition artifact
left over from IBM testing. I always remove that partition (it owns all the
hardware and would not boot properly anyway). But to do that you must
change the Service Partition to "unassigned" (you can reassign it later if
you wish).

Also remember to uncheck the "Power off when the last logical partition is
shutdown". That stops the system from powering off when there are no
partitions activated. That's really annoying when you are first trying to
set things up.


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Tuesday, December 11, 2018 10:04 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

Jim,

Figured it out.
At the server level, I had to assign max processor to Sharepool1.
Now Sharepool1 appears at the partition level in the Processor Pool Drop
down.

Question.
With the P9 and HMC 7063, the server itself is considered a partition,
partition ID 1.

This did not appear on my current P7 and HMC 7063.

When did this change?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Tuesday, December 11, 2018 9:14 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

Jim,

Followed that path, only Defaultpool(0) appears in the dropdown window to
select.
There must be another setting somewhere to allow shared processor pools
somewhere.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer
Sent: Tuesday, December 11, 2018 7:31 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

Two step process: First under "partitions" (there won't be any) near the
top press "Create Partition" and follow the wizard.

Now you have a partition with a default profile.

Click on the partition and under actions, Profiles, Manage Profiles. Now
you are in the "old" interface and you can manage the partition profile as
you remember how to from the old interface.

Stupid. Why not just drop us into that dialog in the first place.


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Tuesday, December 11, 2018 3:59 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

ASMI steps completed.
P9-9009-42A Powered on to standby.
All CPU, Memory, PCI cards reporting in correctly.

Creating my first partition.

Where do I define/allocate processors to the shared processor pool,
SharedPool01?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Steinmetz, Paul
Sent: Tuesday, December 11, 2018 12:06 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC 7063-CR1 configuration and initial P9 power on

Somehow, on HMC network setup, eth0, Enable DHCP Server became unchecked.
Re-enabled DHCP, HMC now sees the server.

Onward.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer
Sent: Monday, December 10, 2018 6:12 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC 7063-CR1 configuration and initial P9 power on

Yea that short walk tends to heal several wounds and settle folks down.

As I said before, the P9s just need time to fight a bit.

Jim Oberholtzer
Agile Technology Architects



On Dec 10, 2018, at 5:01 PM, Evan Harris <auctionitis@xxxxxxxxx> wrote:

Hi Paul

yes, that's assuming the IP address is already assigned (like for
instance if you moved it from another HMC) The find function uses a
range of addresses to look for a specific system, again assuming an
address has been assigned. Basically there's a DHCP thing going on
between the HMC and the Managed Server.

if the system has not been powered on or connected to a HMC before
then just check your HMC cabling to make sure it is correct. If you
have to change it you might need to give it a few minutes.I;ve
occasionally been a bit frustrated and then the managed system just
pops up so going for a short walk can't hurt. A watched pot never
boils
and all that.

On Tue, Dec 11, 2018 at 11:57 AM Steinmetz, Paul
<PSteinmetz@xxxxxxxxxx>
wrote:

Evan,

I have all that.
The "add managed system" is asking for an IP address.
???

Paul


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf
Of Evan Harris
Sent: Monday, December 10, 2018 5:53 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC 7063-CR1 configuration and initial P9 power on

Hi Paul

You should only need the connection between the HMC and the server at
this point, so you only need the connection to between Ethernet
Connector 1 on the HMC and HMC1 port on the Power server.

If the cabling is correct you can always use the HMC Find Managing
system function to go and search for the system. if it is not
connected then connecting it should be enough but you will need to be
a little bit patient as it takes a few minutes.


On Tue, Dec 11, 2018 at 11:45 AM Steinmetz, Paul
<PSteinmetz@xxxxxxxxxx>
wrote:

Evan,

I'll have to repeat these steps below, since my HMC did not see the
server.

- Connect Power to the Managed System; watch them complete the
intitial power on sequence (basically until the power light is
flashing)
- Look for the managed system in the HMC using the serial number to
verify; if my cabling is correct it should have connected and be
waiting for first time authentication

Question.
Do the server's 5899 NIC cards have to be connected at this time?
I didn't think they did?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf
Of Evan Harris
Sent: Monday, December 10, 2018 5:39 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC 7063-CR1 configuration and initial P9 power on

Hi Paul

I am not sure which manual the table you are referring to appears
in, but generally the sequence of events I follow is something like:
- cable up the machine(s) and HMC including network cables
- Power up the HMC and perform basic configuration
- Connect Power to the Managed System; watch them complete the
intitial power on sequence (basically until the power light is
flashing)
- Look for the managed system in the HMC using the serial number to
verify;
if my cabling is correct it should have connected and be waiting for
first
time authentication
- Go through and enter the managed system passwords and ASMI
passwords
- At that point I might start the Managed system using the HMC

I would not skip the passwords as they are required to allow the HMC
to manage the system.

Hope this helps.

On Tue, Dec 11, 2018 at 10:29 AM Steinmetz, Paul
<PSteinmetz@xxxxxxxxxx>
wrote:

I'm following Table 1. Manual HMC configuration tasks and where to
find related information



13. Connect the managed system to a power source.

14. Set passwords for the managed system, and each of the ASMI
passwords
(general and admin) Setting passwords for the managed system

15. Access ASMI to set the date and time on the managed system.

16. Start the managed system and return to this checklist when you
have completed this step.



Questions.

1) Do steps 14 and 15 need to be completed at this time or can they
be done at a latter point?

I've never logged into our ASMI on our current system.



Step 16,

2) How is the managed system stated at this point?

Does it need to be powered on manually before it is added "Add
managed system"?

How is it powered on this done if not yet appearing on the HMC?


Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
http://www.pencor.com/



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com



--

Regards
Evan Harris
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please
take a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com



--

Regards
Evan Harris
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To
subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our
affiliate
link: https://amazon.midrange.com



--

Regards
Evan Harris
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com


As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.