Re: HMC 7063-CR1 configuration and initial P9 power on

[Evan Harris <auctionitis@xxxxxxxxx>]

Hi Paul

I am not sure which manual the table you are referring to appears in, but
generally the sequence of events I follow is something like:
- cable up the machine(s) and HMC including network cables
- Power up the HMC and perform basic configuration
- Connect Power to the Managed System; watch them complete the
intitial power on sequence (basically until the power light is flashing)
- Look for the managed system in the HMC using the serial number to verify;
if my cabling is correct it should have connected and be waiting for first
time authentication
- Go through and enter the managed system passwords and ASMI passwords
- At that point I might start the Managed system using the HMC

I would not skip the passwords as they are required to allow the HMC to
manage the system.

Hope this helps.

On Tue, Dec 11, 2018 at 10:29 AM Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
wrote:

> I'm following Table 1. Manual HMC configuration tasks and where to find
> related information
>
>
>
> 13. Connect the managed system to a power source.
>
> 14. Set passwords for the managed system, and each of the ASMI passwords
> (general and admin)          Setting passwords for the managed system
>
> 15. Access ASMI to set the date and time on the managed system.
>
> 16. Start the managed system and return to this checklist when you have
> completed this step.
>
>
>
> Questions.
>
> 1) Do steps 14 and 15 need to be completed at this time or can they be
> done at a latter point?
>
> I've never logged into our ASMI on our current system.
>
>
>
> Step 16,
>
> 2) How is the managed system stated at this point?
>
> Does it need to be powered on manually before it is added "Add managed
> system"?
>
> How is it powered on this done if not yet appearing on the HMC?
>
>
> Thank You
> _____
> Paul Steinmetz
> IBM i Systems Administrator
>
> Pencor Services, Inc.
> 462 Delaware Ave
> Palmerton Pa 18071
>
> 610-826-9117 work
> 610-826-9188 fax
> 610-349-0913 cell
> 610-377-6012 home
>
> psteinmetz@xxxxxxxxxx<mailto:psteinmetz@xxxxxxxxxx>
> http://www.pencor.com/
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: https://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at https://archive.midrange.com/midrange-l.
>
> Please contact support@xxxxxxxxxxxx for any subscription related
> questions.
>
> Help support midrange.com by shopping at amazon.com with our affiliate
> link: https://amazon.midrange.com