Re: Lost IP connection to 41A

[DrFranken <midrange@xxxxxxxxxxxx>]

Well the top port is the one used for the LAN Console. Don't know if you 
use a direct cable for that or not but if you do certainly assure that 
one is in T1. (Numbers go T1 top to T4 bottom)

The rest of the ports depend on what you used them for. If they all go 
to the same switch then it really shouldn't matter and something else is 
then afoot.

But always remember the 'Foghorn Leghorn Rule' 
https://www.youtube.com/watch?v=S9dF5xuJBbM

        - Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 3/30/2018 1:18 PM, Bradley Stone wrote:
> I was messing around straightening up some cables.  I unplugged the 2 cat 5
> cables from the back of my 41A
>
> I plugged them back in (the first two on p1-c10, one has the green arrow
> above it lit) and can't seem to get connectivity back to them now.
>
> I can't get a LAN console either as that IP address isn't responding now
> either to pings or anything.
>
> I tried an IPL from the panel, no dice.
>
> Any ideas?    Thanks!