Re: Print device to Windows shared printer

[Charles Wilt <charles.wilt@xxxxxxxxx>]

9100 is the port a network attached printer would listen on...

Going through a Windows share is completely different...

> From here,
https://technet.microsoft.com/en-us/library/cc783789(v=ws.10).aspx

I'd think your best bet would be LPR (RMTOUTQ) better yet Internet Print
Protol (IPP)

Charles


On Wed, Jan 31, 2018 at 12:09 PM, Justin Taylor <JUSTIN@xxxxxxxxxxxxx>
wrote:

> 9100 is what I tried.  Right now, the print device has a CPD337F message.
>
>
> Remote device rejected an attempt by the writer to open a connection.
>
> Cause . . . . . :   This error may have occurred for the following reasons.
>           1) An incorrect port number or internet address was specified
>              in the printer device description.
>           2) The remote device, if it is a printer, may be busy printing
>              from another host
>           3) The remote device, if it is a printer, may not be ready to
>              print and may require operator intervention.
>
> Recovery  . . . :   Do one of the following:
>           1) Verify that the correct port number and internet address was
>              specified in the printer device description. If a remote
> location
>              name was used, verify that the internet address for this
> location
>              name is correct. Start the writer if it has ended and try
> printing
>              again.
>           2) No recovery action is required. Printing will continue when
>              the writer is able to use the printer.
>           3) Ready the printer. Printing will continue when the printer
>              becomes ready to print.
>
>
>
>
> -----Original Message-----
> From: John McKee [mailto:jmmckee3@xxxxxxxxx]
> Sent: Wednesday, January 31, 2018 12:14 PM
> To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
> Subject: Re: Print device to Windows shared printer
>
> There are a couple of other ports, as I recall.  But 9100 is the best
> option, since part of that is involved with allowing the i to control the
> printer.  Stop doing something for three years and lots of cobwebs start
> accumulating.
>
> John McKee
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: https://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at https://archive.midrange.com/midrange-l.
>
> Please contact support@xxxxxxxxxxxx for any subscription related
> questions.
>
> Help support midrange.com by shopping at amazon.com with our affiliate
> link: http://amzn.to/2dEadiD