Re: Print device to Windows shared printer

Is this printer on the list of ASCII printers that are supported? For
example, Zebra printers were not directly supported, as I recall. Take a
look at this page. Bookmark it as well. It have connection details for
ASCII printers:


http://www-01.ibm.com/support/docview.wss?uid=nas8N1019605


John McKee

On Wed, Jan 31, 2018 at 1:09 PM, Justin Taylor <JUSTIN@xxxxxxxxxxxxx> wrote:

9100 is what I tried. Right now, the print device has a CPD337F message.


Remote device rejected an attempt by the writer to open a connection.

Cause . . . . . : This error may have occurred for the following reasons.
1) An incorrect port number or internet address was specified
in the printer device description.
2) The remote device, if it is a printer, may be busy printing
from another host
3) The remote device, if it is a printer, may not be ready to
print and may require operator intervention.

Recovery . . . : Do one of the following:
1) Verify that the correct port number and internet address was
specified in the printer device description. If a remote
location
name was used, verify that the internet address for this
location
name is correct. Start the writer if it has ended and try
printing
again.
2) No recovery action is required. Printing will continue when
the writer is able to use the printer.
3) Ready the printer. Printing will continue when the printer
becomes ready to print.




-----Original Message-----
From: John McKee [mailto:jmmckee3@xxxxxxxxx]
Sent: Wednesday, January 31, 2018 12:14 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: Print device to Windows shared printer

There are a couple of other ports, as I recall. But 9100 is the best
option, since part of that is involved with allowing the i to control the
printer. Stop doing something for three years and lots of cobwebs start
accumulating.

John McKee


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD