RE: Checking status of HMC remotely

Larry,

HMC was off, due to heat.
Powered up manually, no issues so far.

Do you have a current link for IMM setup and config?
I found this old link- 2010.
http://www.ibm.com/support/knowledgecenter/STAV45/com.ibm.sonas.doc/imm_users_guide_60y1465.pdf

I'm a bit confused, found this doc on a Google search, stating not to configure it. Integrated Management Module v2 is affected by vulnerabilities in OpenSSL (CVE-2014-0160 and CVE-2014-0076)"
IBM will not be providing a fix for IMM2 on the HMC because it is an unsupported function. HMC users should not have the IMM2 port configured or cabled for network access.
https://www-304.ibm.com/support/docview.wss?uid=nas8N1020037

I'm currently using ETH0 (to Power7 private IP rannge) and EHT1 (to switch public IP)
Does the IMM take a 2nd fixed IP and utilize either ETH2 or ETH3?

https://www.google.com/search?q=HMC+7042-CR6&biw=1920&bih=921&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwig1bago-zOAhVH7BQKHXKqD84QsAQISw&dpr=1#imgrc=cEyr3b_E-KCd9M%3A

Thanks
Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Sunday, December 18, 2016 8:12 PM
To: Midrange Systems Technical Discussion
Subject: Re: Checking status of HMC remotely

Likely. We see the HMCs go down much sooner than Power7 or Power8 machines. The small 1" fans simply cannot move enough air when the room gets toasty.

Do take a few minutes and configure up the IMM though. Can be your ticket to staying in your pink fuzzy bunny slippers and restarting things from home. :-)

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 12/18/2016 8:07 PM, Steinmetz, Paul wrote:

Larry,

Honestly, I'm not sure if IMM is wired and/or configured.
Only ever used the HMC web access.
Currently I can't ping the HMC, so think it did shut down, due to high temp.

Will know more in the morning.

Paul


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
DrFranken
Sent: Sunday, December 18, 2016 7:38 PM
To: Midrange Systems Technical Discussion
Subject: Re: Checking status of HMC remotely

First thing I would do is access the IMM that is built into the HMC hardware. From there you can see the HMC temps, see if it's running or idle, start it up or shut it down etc.

Of course you DID cable that, give it a fixed IP address, and create a
logon to the IMM, RIGHT? :-)

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 12/18/2016 6:32 PM, Steinmetz, Paul wrote:

All our iSeries LPAR reported multiple temperature alarms, SRC11007201 - AMBTEMP.
Cannot currently access our HMC remotely via WEB interface..
I think it may have shut down, due to high temperature.
Data Center was over 100, temp coming back down.
Any other ways to remotely check HMC.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link: http://amzn.to/2dEadiD