×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
We had that error at one time also. Our system was resolving the IP address to an IPv6 address not an IPv4. We do not run IPv6 however the local loop back has an IPv6 address defined as well as an IPv4. I disabled the IPv6 and the NTP errors went away.
Chris Bipes
Director of Information Services
CrossCheck, Inc.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Monday, November 17, 2014 7:06 AM
To: 'midrange-l@xxxxxxxxxxxx'
Subject: TCP9110 - The maximum threshold for SNTP Client errors has been reached.
All LPARS, started receiving this message on 11/12/14 - TCP9110 The maximum threshold for SNTP Client errors has been reached.
Checked the QTOTNTP job
Connecting to host 206.246.122.250 using port 123.
No response received from NTP server.
Also checked NIST Internet Time Service, that IP was listed as ok.
http://tf.nist.gov/tf-cgi/servers.cgi
Do I need to switch to a new IP?
Any recommendations?
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
