RE: HMC and ASM

If you've cabled into the back of the ASMi and cannot get to the web
page using the IP address of the power (used function 30 to figure out
what each port is set too), one thing to check is that TLS is disabled
on your browser....

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lukas Beeler
Sent: Monday, August 24, 2009 1:36 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC and ASM

On Mon, Aug 24, 2009 at 20:23, Dave Snyder<DSnyder@xxxxxxxx> wrote:

If I power it down and remove power, will it reset the IP address of

the

port back to the default, or only if I remove the cable from the port,

or

never until a "hard" FSP reset is done like you mention.

The last one. But cycling the power might help if the ASMI is "stuck"
somehow.

Did you do the telnet test?

--
Read my blog at http://projectdream.org
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



This message (including any attachments) is intended only for
the use of the individual or entity to which it is addressed and
may contain information that is non-public, proprietary,
privileged, confidential, and exempt from disclosure under
applicable law or may constitute as attorney work product.
If you are not the intended recipient, you are hereby notified
that any use, dissemination, distribution, or copying of this
communication is strictly prohibited. If you have received this
communication in error, notify us immediately by telephone and
(i) destroy this message if a facsimile or (ii) delete this message
immediately if this is an electronic communication.

Thank you.