×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
vhamberg@xxxxxxxxxxx wrote:
Thanks so much for the help - does the cage include that 4th drive on top, or do I pull out that vented grill in front with the ring attached?
No. Unfortunately, the 4th drive is a real pain to get at. Which is
part of the reason I don't have 4th drive installed (the other is
cooling concerns).
There's a ring up in front of the 4th drive bay. I don't have the front
panel off to see exactly, but IIRC, the ring holds the inner (metal)
drive bay cover. You'll need to remove the panel to extract the drive
out the front. To get the front panel off you'll also need to remove
right side panel to get at 2 of the front panel screws. My previous
reply (no) was inaccurate.
Cage removal also involves a slide latch near the bottom of the cage.
There's a screw on the front (metal) panel that needs to
loosened/removed such that lever can move to right (towards motherboard)
to free the 2 tabs. I'll send photo.
Keith
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
