RE: Service Tool IP Address

["Chris Bipes" <chris.bipes@xxxxxxxxxxxxxxx>]

Thank you.  I will look around there but I do have to say that I am not
using a LAN console. 


Christopher Bipes
Information Services Director
CrossCheck, Inc.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Evan Harris
Sent: Tuesday, December 05, 2006 4:49 PM
To: Midrange Systems Technical Discussion
Subject: Re: Service Tool IP Address

Hi Chis

I seem to remember setting a Service tools address using SST (or DST
- whichever one is the one you get using Option 21 from the front
panel) under the Service tools, configuration or devices.

I set this address as part of a LAN console set up, but don't remember
the exact menu items - I  guess if you can hunt around the menu options
a bit to see if anything pairs up with the wrong address you keep
seeing. There was some relationship between setting the address in the
Lan Consoel set up and the address the Lan Console card was on. Nothing
about this was intuitive hence my poor memory of it.

I realise that's a bit vague, and don't know if it is applicable, but I
hope it helps even if it just ends up being an option you can rule out,
or at least some other avenue to explore.