RE: Service Tool IP Address

["Chris Bipes" <chris.bipes@xxxxxxxxxxxxxxx>]

Done all that.  The issue I am having is it is reporting the wrong IP
Address.  Where does OPSNAV get the IP address for the service tools.
My PC ping returns the correct IP address.  OPSNAV open the iSeries for
every thing else but service tools.  The error message has the WRONG IP
address.  Where is this stored?


Christopher Bipes
Information Services Director
CrossCheck, Inc.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Helgren
Sent: Tuesday, December 05, 2006 5:02 PM
To: Midrange Systems Technical Discussion
Subject: Re: Service Tool IP Address

I found this in the FAQ's:

In order to use the Service tools portion of Operations Navigator you
must have all of the following:

   1. A user id and password for DST
   2. added the Service Tools Interface to the TCP/IP service table (See
      command below)
   3. Restarted TCP/IP
   4. Validated that there is a lister on port 3000 with NETSTAT *CNN.

If you get the message "No Service Tools Interface found at address
(iSeries system)" then you have not complete all the steps above *OR*
TCP port 3000 is blocked between your Windoze worstation and your
iSeries system. To add the service table entry, use this command:
|ADDSRVTBLE SERVICE('as-sts') PORT(3000) PROTOCOL('tcp') 
|ALIAS('AS-STS')|