|
midrange.com
Another point is that I wouldn't be trying to drive all 8 from the imbedded
controller, but instead with the added PCI-X 5776 controller. I think i'm
reading that at least some of the drives have to be driven by the embedded
controller on the 520s, but wanted to find out definitively.
We just decided today that we're not going to put an IXS on this machine
(decided against BlackBerry Enterprise Server), so i've got some more card
slots to play with now and the no-expansion CEC looks more doable now.
"Chris Bipes"
<chris.bipes@cros
s-check.com> To
Sent by: "Midrange Systems Technical
midrange-l-bounce Discussion"
s@xxxxxxxxxxxx <midrange-l@xxxxxxxxxxxx>
cc
05/30/2006 03:50 Subject
PM RE: 5727 and 5776 (520+ disk
options)
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
1. do you have an HMC, if so, you can move your load source by creating
a partition so you should be able to drive all 8 drives off the 5776,
but for a normal system I do not think you can use the 5776 as the load
source.
2. what is your goal for these drives? Performance or protection? You
get better performance with two RAID sets on two controllers. You also
achieve controller level redundancy. My understanding is running 8
drives on the embedded controller is a performance hit, especially with
15K drives. If you are running slower 10K drives of the same size, I
think the embedded controller can keep up with 8 drives.
Like you said, "It depends: ;)
Christopher Bipes
Information Services Director
CrossCheck, Inc.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Tuesday, May 30, 2006 12:29 PM
To: Midrange Systems Technical Discussion
Subject: 5727 and 5776 (520+ disk options)
Ok... Who's familiar with the 520+, 5727 (embedded 40mb cache RAID
controller), and 5776 (90mb cache PCI-X RAID controller)?
It looks like I can put a 5776 in our new 520+'s CEC, but i'm trying to
figure out for sure if I can drive all 8 drives in the CEC with it. One
item i'm reading makes me think I have to drive the 4 drives in the base
slot with the embedded 5727 controller. Does anyone know this for sure?
If I can drive them all with the 5776, would it be better to drive them
all with the 90mb controller, or split them with each controller driving
4
drives? "It depends", right? ;)
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
ForwardSourceID:NT00047BC6
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
